Castel MAC TC 60 N Инструкция по эксплуатации онлайн [7/17] 272070

Castel MAC TC 60 N Инструкция по эксплуатации онлайн [7/17] 272070
7
GB
3. Check all wiring connections.
4. Check electrical input.
5. Check the standard pressure of the refri-
gerating system.
6. Check the water connection with adjust-
ment of the pressure switch valve during
operation and the correct flow of conden-
sing water (in water-cooled units).
7. Check that the preservation unit reaches
the set temperature and do a manual
defrost.
If the appliance or the remote conden-
sing unit have not been transported in an
upright position (e.g. horizontally) or
have been overturned during installation,
wait at least 4 hours before starting up
the equipment.
Inform the customer of the exact use of
the appliance, with specific reference to
the use and requirements of the custo-
mer.
Installation and commissioning
must be carried out by authorised
Castelmac personnel.
2.8 Safety and control systems
Door microswitch:
shuts off fans in the cell when the door is
opened.
Main fuses:
protect the power circuit against short cir-
cuiting and overloads
Safety thermostat:
intervenes when the appliance overheats
due to extended operation of evaporator
defrosting elements
Safety pressure switch:
intervenes in the event of overpressure in
the refrigerant circuit
Mechanism to open door from inside
should the door accidentally close
Chamber temperature control:
controlled by the electronic board by
means of the sensor located inside the cell
End of defrost temperature control: con-
trolled by the electronic board by means of
the sensors on the evaporator.
Internal humidity control (for TC 60-C only)
This is controlled by the electronic board by
means of the sensor located inside the cell.
2.9 Appliance disposal
The appliance must be demolished and
disposed of in compliance with current
regulations in the country of installation,
above all with regard to the refrigerant
gas and compressor lubricant oil.

Содержание

Скачать