Bras B-Cream 2 HD LK [19/52] In place sanitization

figure 11).

figure 11

6 Replace the container by pushing it towards the back wall,

making sure it fits properly onto the gasket. The locking lever

will be lowered until it rests on the drip tray surface (see figure

12).

figure 12

7 Rinse using a cool beverage in order to eliminate any

remaining sanitising solution from the bottom of the containers.

Dry the inside of the containers with a disposable paper towel.

5. 5 IN-PLACE SANITIZATION

Sanitising the assembled device, prior to putting into

service, should only be performed, if necessary, as an

additional precaution to the sanitisation of the

disassembled devices described previously, never instead

of it.

1 Prepare a solution of water and sanitising product approved

by the authorities in your country in a basin, according to the

manufacturer's specifications. In the absence of a specific

sanitising product, prepare a solution of water and sodium

hypochlorite (bleach) at a ratio of 1 tablespoon per 2 litres of

water.

2 Pour the solution into the containers.

3 Using a suitable brush, wipe the solution onto all parts

above the level of the solution and on the underside of the lid.

4 Install the lid and operate the dispenser in order to allow the

solution to be stirred for about 2 minutes. Drain the sanitising

solution from the containers through the taps and then dispose

of it.

5 Rinse using a cool beverage in order to eliminate any

remaining sanitising solution from the bottom of the containers.

Do not perform further rinsing.