Home
Главная
MCZ
Дровяная печь
Anthea
Инструкция по эксплуатации Страница: 24

MCZ Anthea [24/27] Attention

INSTALLATION AND USE MANUAL

Chapter 5

page

Operation

The flame must have as far as possible a smooth and laminar flow.

On the various occasions when the stove needs reloading, the

door should be opened slowly, to avoid blowbacks of smoke

into the room.

Proceed as follows:

• Place a small amount of balled paper in the stove.

• Cover the paper with a small quantity of twigs and a few

pieces of wood.

• Fully open the combustion air regulator.

• Light the paper and, if necessary, keep the door open for

several minutes until the combustion chamber and chimney

flue are heated.

• When the twigs are burning, the door can be closed.

As the fire burns, add wood. Never overload the stove with wood (see

technical specifications in the table).

As soon as the flames have died down and a bed of embers has

formed, load the stove in the normal way.

Small loads of wood are preferable to large ones for

combustion.

We suggest this fuel loading method is adopted even in subsequent

product use.

To obtain nominal power, place the load of wood indicated

in the technical specifications table in the combustion

chamber (

chapter 3

). Stove autonomy is about 45 minutes.

When the fire dies down, load the stove again.

Attention

• Do not use volatile, flammable substances

(petrol, alcohol etc.) for lighting the fire.

• Do not use fuels which could release toxic

substances or pollutants.

• Do not put the fire out by throwing water on it.

• Check the external and internal air intakes, and

the flue pipe, at least once a year, arranging for

them to be cleaned.

• During use, the metal parts and the glass reach

high temperatures. For all jobs of loading the

stove, adjustment or cleaning the ash drawer,

use the insulating glove provided..

• Never leave children unattended near the stove

when it is in use.

• The risk of burns from contact with hot surfaces

is very high.

• In the event of poor weather conditions for stove

use (low pressure, temperate temperatures,

wind) reversed draught may occur in the chimney

flue. If this occurs, use a small quantity of paper

to heat the chimney flue and restore normal

draught. Afterwards, proceed with normal stove

lighting.

MCZ Anthea [24/27] Attention

Содержание

Похожие устройства