Lincat J10pFL — рекомендации по использованию и уходу за жарочным маслом [7/17]
![Lincat J10nFL [7/17] Warning always allow oil to cool to a maximum 55](/views2/1337693/page7/bg7.png)
IS 358 ECN 3592
7
NOTES ON FRYING MEDIA
Ensure oil is always maintained at the level indicated (H-high, L-low). Good quality vegetable oil is
recommended. Animal fat may be used - but must always be melted first. Animal fat has a lower smoke
and fire temperature than vegetable oil and taste is transferred when cooking with it (e.g. onions fried in
animal fat will taint other foods i.e. fish which may follow). This does not occur when cooking with
vegetable oil.
The life expectancy of oils and cooking fats will be lengthened if they are filtered regularly - food particles
not removed turn rancid and reduce oil/fat quality.
Vegetable oils and animal fat are incompatible - e.g. if sausages containing a lot of animal fat are fried in
vegetable oil, the oil will tend to "glue" and spoil.
The life of oil or fat will also be extended if the temperature is turned down when the fryer is not in use -
otherwise if left "full-on" the oil is being subjected to needless heat treatment and thereby destroyed.
Used oil symptoms firstly indicate discolouration by darkening. The oil becomes thin its fat content having
become exhausted. The next symptom is an unhealthy yellow foam which may appear on the surface, and
the third and more serious one is that the oil will boil or "surge" if not changed - thereby causing damage.
Be safe, not sorry. Keep your oil in good condition and ensure a healthier food product and happier
customers.
Please note also, that "spent" oil will have a lower flash point than new oil and therefore present a greater
fire hazard. Also avoid overflow from over-wet loads or over-large batches.
In time, oil/fat may build up as a dried-on residue on tanks, baskets etc., although this can be minimised on
baskets by regular washing in hot water and detergent. If, subsequently, it cannot be removed by normal
cleaning, various branded cleansers are available such as "Carb 'n' off" which makes removal easy after
overnight application. Carb „n‟ off is available from us Part No. FCB01.
If a fryer is to be out of use for a lengthy period, drain and clean the tank. Lightly oil tanks below the batter
plate with cooking oil.
Warning : Always allow oil to cool to a maximum 55
o
C before draining.
Содержание
- User and installation instructions p.1
- Silverlink 600 gas fryer j5 and j10 p.1
- Installation instructions 4 6 p.2
- Foreword 3 p.2
- Troubleshooting 14 15 p.2
- Technical specification 16 p.2
- Spares list 16 p.2
- Servicing 11 13 p.2
- Service 17 p.2
- Operating instructions 9 10 p.2
- Notes on frying 7 8 p.2
- Warning p.3
- Maintenance p.3
- Important p.3
- Foreword p.3
- Consequential loss p.3
- Before commencing installation of the appliance please take time to read the following installation instructions carefully parts protected by the manufacturer are not to be adjusted by the installer or user p.4
- Stabilising kit installation instructions p.5
- Anticlockwise to reduce it p.6
- After setting ensure the governor cap is properly secured and the blanking screws replaced in p.6
- With main burner lit refer to operating instructions page 9 adjust the burner pressure by the p.6
- Use the test point provided on the gas control valve marked in fig 1 a to check the supply p.6
- Use the test point marked out fig 1 b to set the unit to the appropriate burner pressure 3 adjustment is made via the valve s onboard governor which is situated centrally on the valve p.6
- The test points p.6
- Remove the governor cap and turn the screw clockwise to increase the outlet pressure and p.6
- Method described above to the value shown on the technical data table page 16 p.6
- Inlet pressure refer to technical data table on page 16 p.6
- Fig 1 c p.6
- Warning always allow oil to cool to a maximum 55 p.7
- Notes on frying media p.7
- C before draining p.7
- Oil capacity p.8
- Frying tips p.8
- Frozen foods p.8
- A guide to frying times p.8
- A a thermostat knob b control valve c pilot d limit reset location e drain valve blanking cap f drain valve lock g drain valve handle p.9
- Operating instructions p.9
- Note lids must not be used when cooking is in progres p.9
- Lighting of the appliance please ensure that the gas isolation valve for the appliance is turned to the open position before attempting to light this unit p.9
- Standby p.10
- Shut down of the appliance p.10
- Preparation for use p.10
- Drainage p.10
- Cleaning instructions p.10
- Servicing p.11
- J5 j10 general service p.11
- Reversal of above for reassembly p.12
- Loosen the thermopile retaining nut located underneath the pilot assembly p.12
- J5 j10 component replacement p.12
- Ignitor electrode and pilot jet p.12
- Disconnect the thermopile lead at the control valve p.12
- Control thermostat p.12
- Withdraw the thermopile from the pilot bracket p.12
- Thermopile p.12
- Thermocouple this operation is easier if the pilot assembly is removed see above p.12
- The burner can now be removed through the rear access opening p.13
- Burner p.13
- Fault finding p.14
- Technical data p.16
- Spares list the following components are listed with the lincat reference number followed by a brief description ig14 ignitor electrode ig19 piezo igniter pi25 pilot assembly tc19 thermocouple tc20 thermopile th99 control thermostat th96 safety limit thermostat va20 gas control valve p.16
- Propane gas g31 p.16
- Natural gas g20 p.16
- Models j5 and j1 p.16
- Lincat service help desk p.17
- Gas catering equipment should be routinely serviced to ensure a long trouble free life with this in p.17
- Conditions of guarantee p.17
- Authorised service agents p.17
- 01522 500881 p.17
- Service p.17
- Mind it is recommended that the appliances are serviced every 6 months by a competent gas engineer p.17
Похожие устройства
-
Lincat J5nFLКаталог оборудования Lincat (англ.) -
Lincat J5nFLИнструкция по эксплуатации -
Lincat J10nFLКаталог оборудования Lincat (англ.) -
Lincat J10nFLИнструкция по эксплуатации -
Lincat J10pFLКаталог оборудования Lincat (англ.) -
Lincat DF7pFLКаталог оборудования Lincat (англ.) -
Lincat DF7pFLИнструкция по эксплуатации -
Lincat DF618FLКаталог оборудования Lincat (англ.) -
Lincat DF618FLИнструкция по эксплуатации -
Lincat DF39FLКаталог оборудования Lincat (англ.) -
Lincat DF39FLИнструкция по эксплуатации -
Lincat DF4pFLКаталог оборудования Lincat (англ.)
Узнайте, как правильно поддерживать качество жарочного масла, чтобы обеспечить безопасность и вкус блюд. Советы по уходу и замене масла для лучшего результата.