Rovus STEAM MOP & VACUUM CLEANER 3IN1 [7/100] Problem possible reasons and solutions

Rovus STEAM MOP & VACUUM CLEANER 3IN1 [7/100] Problem possible reasons and solutions
7
PRODUCT USAGE
(See Picture 3)
1. Open the ller cap and use the lling flask provided and pour water into the tank. Please don’t overll (see Picture 3, Image 8).
2. The indicator on steam switch control panel flashes red after plugging in (see Picture 3, Image 9).
MODES
1. Vacuum mode: attach cleaning pad according to Product assembly and press vacuum button (see Picture 3, Image 10), and push and pull the item for cleaning.
Note: Keep vacuum dust cup at the front and cleaning pad at the back (see Picture 3, Image 11).
Caution: When using vacuum mode, do not remove the cleaning pad,
otherwise item and floor may be mangled!
2. Steam mode: keep cleaning pad at the front and vacuum dust cup at the back. Press steam button (see Picture 3, Image 12). Steam would start to form after
about 30 seconds. Device is ready for cleaning (see Picture 3, Image 13).
3. Vacuum + Steam mode: can be used on surfaces with little amount of dust.
Note: Keep vacuum dust cup at the front and cleaning pad at the back.
Caution: In case of heavily dusted surfaces you should use vacuum
mode to cleaning floor before using steam mop. Otherwise garbage
and dust would become wet and hard to clean; the cleaning
performance would be affected.
CARE AND MAINTENANCE
(See Picture 4)
Cleaning the dust cup
1. Pull up the handle of dust cup and take the dust cup out from device (see Picture 4, Image 14).
2. Open the lid of dust cup (see Picture 4, Image 15) by pressing the button and pour out the dust.
Cleaning lter pad
1. Take the lter pad with basket from dust cup (see Picture 4, Image 16).
2. Clean the lter pad by flapping or high pressure air gun (see Picure 4, Image 17).
Caution: The dust would fly everywhere when cleaning the lter pad.
Make sure to protect yourself and environment from dust.
Tip: For best cleaning performance clean all the pads and lters regularly.
Repositioning the lter pad
1. Reposition the lter pad to dust cup by following the groove (see Picture 4, Image 18).
Caution: The lter pad will be loose or poorly performing if the not
positioned correctly
(Note radian on the Picture 4, Image 19).
AFTER USE AND CARE
1. Switch off the unit by unpluging the cord from the outlet. Open the handle adjuster and make fold the handle.
2. Wrap power cord onto cord wrap (upper and nether).
3. Place the mop into the upright position.
4. Place the mop against the wall. Place the PVC part of handle against the wall.
Caution: Store the device in place not reachable to children.
5. Cleaning pad should be cleaned individually from other clothes. Use warm water and liquid to wash cleaning pad clean.
Caution: Do not use washing powder, clothing fabric softener or bleach
for avoiding mangling fabric and low cleaning performance.
After cleaning, dry clean the pad.
6. In case of thrum on the cleaning pad, do not pull, cut by scissors.
TROUBLE SHOOTING
Problem Possible Reasons and Solutions
Steam mop cannot turn on. 1. Check whether the plug is securely plugged into the electrical outlet or not.
2. Check your fuse or breaker.
Steam mop cannot make steam. 1. Check whether there is water in water tank.
2. Check if the steam switch is on.
3. Check if the unit is tilted and put it in the upright position.
Steam mop leaves water on the floor. 1. Check to see if the cleaning pad is too wet.
2. After plugging in, allow 20-30 sec to heat up. Otherwise the steam temperature will
not be high enough.

Содержание

Похожие устройства

Скачать
Случайные обсуждения

Ответы 1

Как включить пар?
3 года назад

Ответы 1

нет пара
2 года назад