Siemens TE501203RW [10/117] Water filter
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Siemens TE501203RW [10/117] Water filter

Siemens TE501209RW (EQ.5) [10/117] Water filter
10
en
4. Assemble the milk frother. Only use the
appliance when the milk frother (6) is
completely assembled and tted.
5. Lift the water tank lid (17).
6. Remove and rinse the water tank (16)
and ll it with fresh cold water. Do not ll
above the max mark.
7. Replace the water tank (16) and push it
rmly downwards into place.
8. Close the water tank lid (17).
9. Fill the bean container (1) with coffee
beans (for preparation using ground
coffee see “Preparation using ground
coffee” on page 13).
10. Press the power on/off switch O / I (9) to
switch on the appliance. LED D ashes
and LED F lights up.
11. Place a container under the milk frother
outlet (6).
12. Carefully pull out the milk frother (6)
to open it. The appliance rinses out
the milk frother (6) with water. LED F
ashes.
13. When LED F lights up constantly,
press in the milk frother (6) to close it.
The appliance heats up and rinses. Some
water will run out of the coffee outlet. When
buttons A (12), B (11) and C (10) light
up, the appliance is ready for use.
Switching off the appliance
If the appliance has not been used for
an hour, it rinses automatically and then
switches off (the length of time can be ad-
justed, see “Settings”, “Automatic switch-off”
on page 11).
Exception: The appliance switches off with-
out rinsing if only hot water or steam was
dispensed.
To switch the appliance off manually before
this, press the service button (12). The
appliance rinses and switches off.
Note: If the appliance is being used for the
rst time, the service programme has been
run, or the appliance has not been oper-
ated for a long period, the rst beverage will
not have the full aroma and should not be
consumed.
When the fully automatic espresso machine
is rst used, you will achieve a suitably thick
and stable “crema” only after the rst few
cups have been dispensed.
If the appliance is in use for a long period of
time, water droplets will form on the ventila-
tion slits. This is normal.
Water lter
Using a water lter can prevent a build-up
of limescale deposits.
A new water lter must be rinsed before it
can be used. To do this, proceed as follows:
1. Press the water lter rmly into the empty
water tank with the aid of the measuring
spoon (18).
2. Fill the water tank (16) with water up to
the max mark.
3. Turn the rotary
knob (13) to position
4. Press and hold buttons B (11) and A
(12) simultaneously for at least
5 seconds. Either “off” or “on”
lights up.
5. Press the start button (10) to select “on”.
6. Press and hold the start button (10) for
at least 5 seconds to conrm. All of the
LEDs light up briey.
7. LED D ashes and LED F lights up.
8. Place a container with a capacity of 0.5
litres under the milk frother outlet (6).

Содержание

Похожие устройства

Скачать