Home
Главная
Hitachi
Аккумуляторная Дрель-Шуруповерт
WH14DSDL-RW
Инструкция по эксплуатации Страница: 3

Hitachi WH14DSDL-RW [3/164] Additional safety warnings

English

b) Use power tools only with speciﬁ cally

designated battery packs.

Use of any other battery packs may create a risk of

injury and ﬁ re.

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a ﬁ re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach of

children and inﬁ rm persons.

CORDLESS IMPACT DRIVER / IMPACT

WRENCH SAFETY WARNINGS

Hold power tool by insulated gripping surfaces, when

performing an operation where the fastener may

contact hidden wiring. Fasteners contacting a “live” wire

may make exposed metal parts of the power tool “live” and

could give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. This is a portable tool for tightening and loosening

screws, bolts and nuts. Use it only for these operation.

2. Make sure to securely hold the tool during operation.

Failure to do so can result in accidents or injuries.

3. Make sure that the battery is installed ﬁ rmly. If it is as all

loose it could come oﬀ and cause an accident.

4. Preparing and checking the work environment. Make

sure that the work site meets all the conditions laid forth

in the precautions.

5. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

6. Never disassemble the rechargeable battery and

charger.

7. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

8. Do not dispose of the battery in ﬁ re. If the battery is burnt,

it may explode.

9. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

10. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or inﬂ ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

11. Check the actual tightening torque with a toruqe wrench.

12. Stop the tool before switching the direction of rotation.

Always release the switch and wait for tool to stop before

switching the direction of rotation.

13. Never touch the turning part. Do not allow the turning

part section to get near your hands or any other part of

your body. You could be cut or caught in the turning part.

Also, be careful not to touch the turning part after using

continuously it for a long time. It gets quite hot and could

burn you.

14. Please use the designated attachments which are

listed in the operations manual and Hitachi’s catalog.

Accidents or injuries could result from not doing so.

15. Make sure to ﬁ rmly install the attachments in the anvil. If

the attachments is not ﬁ rmly installed it might come out

and cause injuries.

After installing the driver bit, pull lightly out the bit to

make sure that it does not come loose during use. If the

guide sleeve does not return to its original position, then

the bit is not installed properly.

Align the plunger located in the square part of the anvil

with the hole in the hex. socket. Then push the plunger,

and mount the hex. socket on the anvil. Check that the

plunger is fully engaged in the holes. When removing the

socket, reverse the sequence.

16. The push button cannot be switched while the tool is

turning. To switch the push button, stop the tool, then set

the push button.

17. In the work of the save mode(S), avoid the continuous

tightening as temperature of electronic components of

the converter switch increase.

18. Install securely the hook. Unless the hook is securely

installed, it may cause an injury while using.

19. To prevent the battery power consumption caused

by forgetting to turn oﬀ the LED light, the light goes oﬀ

automatically in about 15 minutes.

20. Resting the unit after continuous work.

21. Do not touch the metal parts, as it gets very hot during

continuous work.

22. Do not look directly into the light. Such actions could

result in eye injury.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the

protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor may

stop. This is not the trouble but the result of protection

function.

1. When the battery power remaining runs out, the motor

stops.

In such a case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes of

overloading. After that, you can use it again.

3. If the battery is overheated under overload work, the

battery power may stop.

In this case, stop using the battery and let the battery

cool. After that, you can use it again.

Furthermore, please heed the following warning and caution.

WARNING

In order to prevent any battery leakage, heat generation,

smoke emission, explosion and ignition beforehand, please

be sure to heed the following precautions.

1. Make sure that swarf and dust do not collect on the

battery.

○ During work make sure that swarf and dust do not fall on

the battery.

○ Make sure that any swarf and dust falling on the power

tool during work do not collect on the battery.

○ Do not store an unused battery in a location exposed to

swarf and dust.

0000Book_WH14DSDL.indb 30000Book_WH14DSDL.indb 3 2014/08/04 13:51:252014/08/04 13:51:25

Hitachi WH14DSDL-RW [3/164] Additional safety warnings

Содержание

Похожие устройства