Hitachi WH14DSDL-RW [7/164] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi WH14DSDL-RW [7/164] English

Hitachi WH14DSDL-RW [7/164] English
7
English
CAUTION
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
Important notice on the batteries for the Hitachi
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used with
batteries other than these designated by us, or when
the battery is disassembled and modifi ed (such as
disassembly and replacement of cells or other internal
parts).
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specifi c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a Hitachi Authorized Service Center.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
104 dB (A) (WH14DSDL)
105 dB (A) (WH18DSDL)
104 dB (A) (WR14DSDL)
104 dB (A) (WR18DSDL)
Measured A-weighted sound pressure level:
93 dB (A) (WH14DSDL)
94 dB (A) (WH18DSDL)
93 dB (A) (WR14DSDL)
93 dB (A) (WR18DSDL)
Uncertainty K: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Impact tightening of fasteners of the maximum capacity of
the tool:
Vibration emission value
a
h
= 13.4 m/s
2
(WH14DSDL)
10.3 m/s
2
(WH18DSDL)
9.8 m/s
2
(WR14DSDL)
11.7 m/s
2
(WR18DSDL)
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of exposure.
WARNING
○ The vibration emission during actual use of the power
tool can diff er from the declared total value depending in
the ways in which the tool is used.
○ Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to the
trigger time).
NOTE
Due to HITACHI’s continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
0000Book_WH14DSDL.indb 70000Book_WH14DSDL.indb 7 2014/08/04 13:51:262014/08/04 13:51:26

Содержание

Похожие устройства

Скачать