Indesit K6 C10/R [20/48] Routine maintenance and cleaning

Indesit K6 C10/R [20/48] Routine maintenance and cleaning
19
Routine Maintenance and Cleaning
Disconnect the oven from the source of electricity
before performing any maintenance or cleaning. To
ensure a long life for your oven, clean it frequently and
carefully, keeping in mind that:
Do not use steam equipment to clean the appliance.
the enamelled parts and the self-cleaning panels should
be washed with warm water without the addition of abra-
sive powders or corrosive substances which could
damage the finish;
stainless steel may become marked if it comes into
contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time. After
cleaning, it is advisable to rinse thoroughly and dry. It
is also recommended to dry any water drops;
avoid dirt and grease accumulating on the control panel
by cleaning it frequently. Use non-abrasive sponges or
soft cloths to avoid scratching enamelled or shiny steel
parts.
Clean the glass part of the oven door using a sponge
and a non-abrasive cleaning product, then dry thoroughly
with a soft cloth. Do not use rough abrasive material or
sharp metal scrapers as these could scratch the surface
and cause the glass to crack.
Cleaning the hob surface
Prior to cooking, the hob surface should always be cleaned
using a damp cloth to remove any dust or stray food
particles. The hob surface should be regularly cleaned with
a lukewarm solution of water and a mild detergent.
Periodically it may be necessary to use a proprietary
ceramic hob cleaner. First remove all spilt food and fat
with a window scrape, preferably the razor blade type
(not supplied) or, failing that, the fixed blade
razor edge type (see Fig. A). Then clean the hob while it is
still warm to the touch with a suitable cleaner and paper
towel.
Then rinse it and wipe it dry with a clean cloth .If aluminium
foil or plastic items are accidentally allowed to melt on the
hob surface they should be immediately removed from
the hot cooking area with a scraper. This will avoid any
possible damage to the surface. This also applies to sugar
or any food with a high sugar content.
Do not use abrasive sponges or scourers of any type.
Corrosive cleaners such as oven sprays and stain removers
should also not be used (see Fig. B).
Fig. A Fig. B
Glass ceramic hob cleaners Available from
Window scraper Razor blade
scrapers
DIY Stores
Replacement blades DIY Stores,
supermarkets,
chemists
COLLO luneta
HOB BRITE
Hob Clean
SWISSCLEANER
Boots, Co-op stores,
department stores, Regional
Electricity Company shops,
supermarkets
Replacing the Oven Lamp
Disconnect the oven from the power supply by means
of the omnipolar switch used to connect the appliance
to the electrical mains; or disconnect the plug if it is
accessible.
Remove the glass cover of the lamp-holder.
Remove the lamp and replace it with a lamp resistant
to high temperatures (300°C) with the following speci-
fications:
- Voltage: 230V
- Wattage: 25W
- Socket: E14
Replace the glass cover and connect the oven to the
mains.

Содержание

Routine Maintenance and Cleaning Disconnect the oven from the source of electricity before performing any maintenance or cleaning To ensure a long life for your oven clean it frequently and Glass ceramic hob cleaners Available from carefully keeping in mind that Do not use steam equipment to clean the appliance Window scraper Razor blade DIY Stores the enamelled parts and the self cleaning panels should be washed with warm water without the addition of abra sive powders or corrosive substances which could damage the finish Replacement blades COLLO luneta Boots Co op stores HOB BRITE department stores Regional Hob Clean Electricity Company shops SWISSCLEANER supermarkets stainless steel may contact with very become marked hard water or scrapers if it comes into harsh detergents containing phosphorous for long periods of time After cleaning it is advisable to rinse thoroughly and dry It is also recommended to dry any water drops avoid dirt and grease accumulating on the control panel by cleaning it frequently Use non abrasive sponges or soft cloths to avoid scratching enamelled or shiny steel parts Clean the glass part of the oven door using a sponge and a non abrasive cleaning product then dry thoroughly with a soft cloth Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack Cleaning the hob surface Prior to cooking the hob surface should always be cleaned using a damp cloth to remove any dust or stray food particles The hob surface should be regularly cleaned with a lukewarm solution of water and a mild detergent Periodically it may be necessary to use a proprietary ceramic hob cleaner First remove all spilt food and fat with a window scrape preferably the razor blade type CERAtLx not supplied or failing that the fixed blade razor edge type see Fig A Then clean the hob while it is still warm to the touch with a suitable cleaner and paper towel Then rinse it and wipe it dry with a clean cloth If aluminium foil or plastic items are accidentally allowed to melt on the hob surface they should be immediately removed from the hot cooking area with a scraper This will avoid any possible damage to the surface This also applies to sugar or any food with a high sugar content Do not use abrasive sponges or scourers of any type Corrosive cleaners such as oven sprays and stain removers should also not be used see Fig B Fig B DIY Stores supermarkets chemists Replacing the Oven Lamp Disconnect the oven from the power supply by means of the omnipolar switch used to connect the appliance to the electrical mains or disconnect the plug if it is accessible Remove the glass cover of the lamp holder Remove the lamp and replace it with a lamp resistant to high temperatures fications Voltage 230V Wattage 25W Socket E14 300 C with the following speci Replace the glass cover and connect the oven to the mains

Скачать