Hotpoint-Ariston LST 11477 [14/24] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston LST 11477 [14/24] Installation

Hotpoint-Ariston LST 11477 [14/24] Installation
EN
14
Installation
Keep this instruction manual in a safe place for future
reference. If the appliance is sold, given away or moved,
please ensure the manual is kept with the machine, so that the
new owner may benefit from the advice contained within it.
Please read this instruction manual carefully: it contains
important information regarding the safe installation, use and
maintenance of the appliance.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
Positioning and levelling
1. Remove the appliance from all packaging and check that it
has not been damaged during transportation.
If it has been damaged, contact the retailer and do not
proceed any further with the installation process.
2. Check the dishwasher by placing it so that its sides or back
panel are in contact with the adjacent cabinets or even with the
wall. This appliance can also be recessed under a single
worktop
* (see the Assembly instruction sheet).
3. Position the dishwasher on a level and sturdy floor. If the
floor is uneven, the front feet of the appliance may be adjusted
until it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move or
cause vibrations and noise while it is operating.
4. Adjust the height of the rear foot from the front of the
appliance
* on the central lower part of the dishwasher, turning
a hexagonal spanner (red color) with an opening of 8 mm in a
clockwise direction to increase the height or in an
anticlockwise direction to decrease the height.
Connecting the water and electricity
supplies
Connection to the water and electricity supplies should
only be performed by a qualified technician.
The dishwasher should not stand on top of the water
hoses or the electricity supply cable.
The appliance must be connected to the water supply
network using new hoses.
Do not use old hoses.
The water inlet (A) and outlet (B) hoses and the electricity
supply cable may be positioned towards the right or the left in
order to achieve the best possible installation (see figure).
Connecting the water inlet hose
To a suitable cold water connection point: before attaching
the hose, run the water until it is perfectly clear so that any
impurities that may be present in the water do not clog the
appliance; after performing this operation, screw the inlet
hose tightly onto a tap with a ¾ gas threaded connection.
To a suitable hot water connection point: your dishwasher
may be supplied with hot water from the mains supply (if
you have a central heating system with radiators) provided
that it does not exceed a temperature of 60°C.
Screw the hose to the tap as described for connection to a
cold water supply.
If the inlet hose is not long enough, contact a specialist
store or an authorised technician (see Assistance).
The water pressure must be within the values indicated in
the Technical data table (see adjacent information).
The hose should not be bent or compressed.
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device New Acqua Stop
*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it
contains live electrical parts.
* Only available in selected models.

Содержание

Похожие устройства

Installation EN Keep this instruction manual in a safe place for future reference If the appliance is sold given away or moved please ensure the manual is kept with the machine so that the new owner may benefit from the advice contained within it Please read this instruction manual carefully it contains important information regarding the safe installation use and maintenance of the appliance If the appliance must be moved at any time keep it in an upright position if absolutely necessary it may be tilted onto its back Positioning and levelling 1 Remove the appliance from all packaging and check that it has not been damaged during transportation If it has been damaged contact the retailer and do not proceed any further with the installation process 2 Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall This appliance can also be recessed under a single worktop see the Assembly instruction sheet 3 Position the dishwasher on a level and sturdy floor If the floor is uneven the front feet of the appliance may be adjusted until it reaches a horizontal position If the appliance is levelled correctly it will be more stable and much less likely to move or cause vibrations and noise while it is operating 4 Adjust the height of the rear foot from the front of the appliance on the central lower part of the dishwasher turning a hexagonal spanner red color with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height Connecting the water and electricity supplies Ml Connection to the water and electricity supplies should only be performed by a qualified technician Connecting the water inlet hose To a suitable cold water connection point before attaching the hose run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance after performing this operation screw the inlet hose tightly onto a tap with a gas threaded connection To asuitable hot water connection point your dishwasher may be supplied with hot water from the mains supply if you have a central heating system with radiators provided that it does not exceed a temperature of 60 C Screw the hose to the tap as described for connection to a cold water supply K If the inlet hose is not long enough contact a specialist store or an authorised technician see Assistance Ml The water pressure must be within the values indicated in the Technical data table see adjacent information Ml The hose should not be bent or compressed Anti flooding protection To ensure floods do not occur the dishwasher is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance Some models are also equipped with the supplementary safety device NewAcqua Stop which guarantees anti flooding protection even in the event of a supply hose rupture WARNING HAZARDOUS VOLTAGE Under no circumstance should the water inlet hose be cut as it contains live electrical parts M The dishwasher should not stand on top of the water hoses or the electricity supply cable Ml The appliance must be connected to the water supply network using new hoses Do not use old hoses The water inlet A and outlet B hoses and the electricity supply cable may be positioned towards the right or the left in orderto achieve the best possible installation see figure Only available in selected models 14

Скачать