Hotpoint-Ariston LST 11477 [20/24] Only use products which have been
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston LST 11477 [20/24] Only use products which have been

Hotpoint-Ariston LST 11477 [20/24] Only use products which have been
EN
20
Rinse aid and refined salt
Only use products which have been
specifically designed for dishwashers.
Do not use table salt or industrial salt, or
washing up liquid.
Follow the instructions given on the packaging.
If using a multi-functional product it is not necessary to
add rinse aid; however, we recommend that you add salt,
especially if you live in an area where the water is hard
or very hard. Follow the instructions given on the
packaging.
If you do not add salt or rinse aid, the LOW
SALT
* and LOW RINSE AID* indicator lights
remain lit.
Measuring out the rinse aid
Rinse aid makes it easier for the crockery to dry, as water
runs off surfaces more readily and therefore does not leave
streaks or marks.
The rinse aid dispenser should be filled:
When the LOW RINSE AID
* indicator light on the control
panel is illuminated;
1. Open the dispenser by turning the
lid (G) in an anticlockwise direction.
2. Pour in the rinse aid, making sure it
does not overflow from the
dispenser. If this happens, clean the
spill immediately with a dry cloth.
3. Screw the lid back on.
NEVER pour the rinse aid directly
into the appliance tub.
Adjusting the amount of rinse aid
If you are not completely satisfied with the drying results,
you may adjust the quantity of rinse aid used. Use a
screwdriver to turn the dosage adjuster (F) to one of the 6
pre-set positions (the default position is set to 4):
If there are streaks on the crockery, set the adjustment
device to a lower number (1-3).
If drops of water remain on the crockery or if there are
limescale marks present after the cycle has finished, set
the adjuster to a higher number (4-6).
Setting the water hardness
Every dishwasher is equipped with a water softener which, by
using refined salt designed especially for this type of
appliance, supplies water without limescale which is then used
to wash the crockery.
This dishwasher offers a setting which helps to reduce
pollution and optimises washing performance in accordance
with the water hardness level in your area. This information can
be obtained from the organisation which supplies your
household with water.
- Open the door and switch on the machine by pressing the
ON/OFF button.
- Press the P button and hold for approximately 5 seconds;
two short beeps will sound and the indicator light
corresponding to the set degree of hardness will flash
slowly on the control panel (the water softening system is
set to number 2).
- Press the P button repeatedly until the desired hardness
level has been reached (1-2-3-4-5
* see Water hardness
table).
E.g. hardness 1 (indicator light 1 flashing)
hardness 2 (indicator light 1 illuminated, indicator light 2
flashing).
hardness 3 (indicator lights 1 and 2 illuminated, indicator light 3
flashing and so on).
- To exit the function, wait a few seconds or press one of the
option buttons
*, or switch off the machine using the ON/OFF
button.
Even if using multi-functional tablets, the salt dispenser should still
be filled.
(°dH = hardness measured in German degrees - °f = hardness
measured in French degrees - mmol/l = millimoles per litre)
Measuring out the refined salt
In order to achieve the best possible results using a wash
cycle, make sure that the dispenser is never empty. Refined
salt removes limescale from the water, thus avoiding the
formation of deposits on crockery.
The salt dispenser is located in the lower part of the
dishwasher (see Description) and should be filled:
 When the green float
* cannot be seen by simply looking at
the cap of the salt dispenser.
When the LOW SALT
* indicator light on the control panel is
illuminated;
1. Remove the lower rack and unscrew the
container cap (anticlockwise).
2. The first time you do this: fill the water tank
right up to its edge.
3. Position the funnel
* (see figure) and fill the
salt container right up to its edge (this should hold
approximately 1 kg); it is not unusual for a little water to leak out.
4. Remove the funnel
* and wipe any salt residue away from the
opening; rinse the cap under running water and then screw it
on, the head facing downwards so as to let the water flow out of
the four cracks which are arranged in a star shape on the lower
part of the cap. (Salt cap with green float
*)
It is advisable to perform this procedure every time you add
salt to the container.
Make sure the cap is screwed on tightly, so that no detergent
can get into the container during the wash cycle (this could
damage the water softener beyond repair).
When necessary, measure out the salt before a wash
cycle so that any saline solution which has leaked out of the
salt dispenser is removed.
* Only available in selected models.
G
F
Water Hardness Table
°dH °fH mmol/l level
0 11 0 20 1.1 2 1
12 17 21 30 2.1 3 2
17 34 31 60 3.1 6 3
34 50 61 90 6.1 9
4
*
For values between 0°f and 10°f, we do not
recommend the use of salt.
* this setting may cause a slight increase in the
duration of the cycle.

Содержание

Похожие устройства

Rinse aid and refined salt EN Only use products which have been specifically designed for dishwashers Do not use table salt or industrial salt or washing up liquid Follow the instructions given on the packaging If using a multi functional product it is not necessary to add rinse aid however we recommend that you add salt especially if you live in an area where the water is hard or very hard Follow the instructions given on the packaging ra If you do not add salt or rinse aid the LOW SALT and LOW RINSE AID indicator lights remain lit Measuring out the rinse aid Rinse aid makes it easier for the crockery to dry as water runs off surfaces more readily and therefore does not leave streaks or marks The rinse aid dispenser should be filled When the LOW RINSE AID indicator light on the control panel is illuminated 1 Open the dispenser by turning the lid G in an anticlockwise direction 2 Pour in the rinse aid making sure it does not overflow from the dispenser If this happens clean the spill immediately with a dry cloth 3 Screwthe lid back on NE VER pour the ri nse aid di rectly into the appliance tub Adjusting the amount of rinse aid If you are not completely satisfied with the drying results you may adjust thequantity of rinse aid used Use a screwdriver to turn the dosage adjuster F to one of the 6 pre set positions the default position is set to 4 If there are streaks on the crockery set the adjustment device to a lower number 1 3 If drops of water remain on the crockery or if there are limescale marks present after the cycle has finished set the adjuster to a higher number 4 6 Setting the water hardness Every dishwasher is equipped with a water softener which by using refined salt designed especially for this type of appliance supplies water without limescale which is then used to wash the crockery This dishwasher offers a setting which helps to reduce pollution and optimises washing performance in accordance with the water hardness level in your area This information can be obtained from the organisation which supplies your household with water Open the door and switch on the machine by pressing the ON OFF button Press the P button and hold for approximately 5 seconds two short beeps will sound and the indicator light corresponding to the set degree of hardness will flash slowly on the control panel the water softening system is set to number 2 20 Press the P button repeatedly until the desired hardness level has been reached 1 2 3 4 5 see Water hardness table E g hardness 1 indicator light 1 flashing hardness 2 indicator light 1 illuminated indicator light 2 flashing hardness 3 indicator lights 1 and 2 illuminated indicator light 3 flashing and so on To exit the function wait a few seconds or press one of the option buttons or switch off the machine using the ON OFF button Even if using multi functional tablets the salt dispenser should still be filled dH 0 11 12 17 17 34 34 50 Water Hardness Table fH mmol l 0 20 1 1 2 21 30 2 1 3 31 61 60 90 3 1 6 1 level 6 9 1 2 3 4 For values between 0 f and 10 f we do not recommend the use of salt this setting may cause a slight increase in the duration of the cycle dH hardness measured in German degrees f hardness measured in French degrees mmol l millimoles per litre Measuring out the refined salt In order to achieve the best possible results using a wash cycle make sure that the dispenser is never empty Refined salt removes limescale from the water thus avoiding the formation of deposits on crockery The salt dispenser is located in the lower part of the dishwasher see Description and should be filled When the green float cannot be seen by simply looking at the cap of the salt dispenser When the LOW SALT indicator light on the control panel is illuminated 1 Remove the lower rack and unscrew the container cap anticlockwise L 2 The first time you do this fill the water tank U right up to its edge 3 Position the funnel see figure and fill the salt container right up to its edge this should hold approximately 1 kg it is not unusual for a little water to leak out 4 Remove the funnel and wipe any salt residue away from the opening rinse the cap under running water and then screw it on the head facing downwards so as to let the water flow out of the four cracks which are arranged in a star shape on the lower part of the cap Salt cap with green float It is advisable to perform this procedure every time you add salt to the container Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash cycle this could damage the water softener beyond repair KJ When necessary measure out the salt before a wash cycle so that any saline solution which has leaked out of the salt dispenser is removed Only available in selected models

Скачать