Hotpoint-Ariston LST 11477 [21/24] Care and maintenance
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hotpoint-Ariston LST 11477 [21/24] Care and maintenance

Hotpoint-Ariston LST 11477 [21/24] Care and maintenance
EN
21
Care and maintenance
Shutting off the water and electricity
supplies
Turn off the water tap after every wash cycle to avoid
leaks.
Always unplug the appliance when cleaning it and
when performing maintenance work.
Cleaning the dishwasher
The external surfaces of the machine and the control
panel may be cleaned using a non-abrasive cloth
which has been dampened with water. Do not use
solvents or abrasive products.
Any marks on the inside of the appliance may be
removed using a cloth dampened with water and a
little vinegar.
Preventing unpleasant odours
Always keep the door of the appliance ajar in order to
avoid moisture from forming and being trapped inside
the machine.
Clean the seals around the door and detergent
dispensers regularly using a damp sponge. This will
avoid food becoming trapped in the seals, which is
the main cause behind the formation of unpleasant
odours.
Cleaning the sprayer arms
Food residue may become encrusted onto the sprayer
arms and block the holes used to spray the water. It is
therefore recommended that the arms are checked from
time to time and cleaned with a small non-metallic
brush.
The two sprayer arms may both be removed.
To remove the upper sprayer
arm, rotate the locking ring in
an anti-clockwise direction.
The upper sprayer arm should
be replaced with the holes
facing upwards.
The lower sprayer arm can
be removed by pulling it
upwards.
Cleaning the water inlet filter*
If the water hoses are new or have not been used for an
extended period of time, let the water run to make sure it
is clear and free of impurities before performing the
necessary connections. If this precaution is not taken,
the water inlet could become blocked and damage the
dishwasher.
Clean the water inlet filter at the tap outlet regularly.
- Turn off the water tap.
- Unscrew the end of the water inlet hose, remove the filter and
clean it carefully under running water.
- Replace the filter and screw the water hose back into
position.
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the
water. They should be cleaned if you wish to achieve the best
results in every wash.
Clean the filters regularly.
The dishwasher should not be used without filters, or if the
filter is loose.
 After several washes, check the filter assembly and if
necessary clean it thoroughly under running water, using a
non-metallic brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction
and pull it out (fig. 1).
2. Remove the cup filter B by exerting a slight pressure on the
side flaps (fig. 2).
3. Slide out the stainless steel plate filter A (fig. 3).
4. Inspect the trap and remove any food residue. NEVER
REMOVE the wash cycle pump (black detail) (fig. 4).
After cleaning the filters, replace the filter assembly and fix it in
position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
Disconnect the appliance from the electricity supply and
shut off the water tap.
Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is
empty.
* Only available in selected models.
2
C
B
4
3
A
1
C

Содержание

Похожие устройства

Care and maintenance Shutting off the water and electricity supplies w Clean the water inlet filter at the tap outlet regularly Turn off the water tap after every wash cycle to avoid leaks Turn off the water tap Unscrew the end of the water inlet hose remove the filter ana clean it carefully under running water Replace the filter and screw the water hose back into Always unplug the appliance when cleaning it and when performing maintenance work position Cleaning the dishwasher The external surfaces of the machine and the control panel may be cleaned using a non abrasive cloth which has been dampened with water Do not use solvents or abrasive products Any marks on the inside of the appliance may be removed using a cloth dampened with water and a little vinegar Preventing unpleasant odours Always keep the door of the appliance ajar in order to avoid moisture from forming and being trapped inside the machine Clean the seals around the door and detergent dispensers regularly using a damp sponge This will avoid food becoming trapped in the seals which is the main cause behind the formation of unpleasant odours EN Cleaning the filters The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water They should be cleaned if you wish to achieve the best results in every wash w Clean the filters regularly The dishwasher should not be used without filters or if the filter is loose After several washes check the filter assembly and if necessary clean it thoroughly under running water using a non metallic brush and following the instructions below 1 Turn the cylindrical filter C in an anti clockwise direction and pull it out fig 1 2 Remove the cup filter B by exerting a slight pressure on the side flaps fig 2 3 Slide out the stainless steel plate filter A fig 3 4 Inspect the trap and remove any food residue NEVER REMOVE the wash cycle pump black detail fig 4 Cleaning the sprayer arms Food residue may become encrusted onto the sprayer arms and block the holes used to spray the water It is therefore recommended that the arms are checked from time to time and cleaned with a small non metallic brush The two sprayer arms may both be removed 1 To remove the upper sprayer arm rotate the locking ring in an anti clockwise direction The upper sprayer arm should be replaced with the holes facing upwards The lower sprayer arm can be removed by pulling it upwards After cleaning the filters replace the filter assembly and fix it in position correctly this is essential for maintaining the efficient operation of the dishwasher Leaving the machine unused for extended periods Cleaning the water inlet filter If the water hoses are new or have not been used for an extended period of time let the water run to make sure it is clear and free of impurities before performing the necessary connections If this precaution is not taken the water inlet could become blocked and damage the dishwasher Disconnect the appliance from the electricity supply and shut off the water tap Leave the door of the appliance ajar When you return run a wash cycle when the dishwasher is empty Only available in selected models 21

Скачать