Home
Главная
Bosch
Станки распиловочные
GTS 10 J (0.601.B30.500)
Инструкция по эксплуатации Страница: 32

Bosch GTS 10 J (0.601.B30.500) [32/355] Changing the saw blade see figures j1 j4

32 | English

1 619 929 J53 | (12.5.11) Bosch Power Tools

– Insert the fastening screws through the lateral holes in the

parallel guide 10.

The heads of the screws serve as a guide for the auxiliary

parallel guide.

– Move the auxiliary parallel guide 37 over the heads of the

fastening screws.

– Mount the washers to the fastening screws and tighten

them with the wing nuts .

Mounting the Angle Stop (see figures E1 –E2)

– Insert the guide rail 39 of the angle stop 3 into one of the

guide grooves 5 of the saw table intended for this purpose.

For improved placement of long workpieces, the angle stop

can be extended with profile rail 28.

– If required, mount the profile rail to the angle stop with fas-

tening kit 40.

Dust/Chip Extraction

Dusts from materials such as lead-containing coatings, some

wood types, minerals and metal can be harmful to one’s

health. Touching or breathing-in the dusts can cause allergic

reactions and/or lead to respiratory infections of the user or

bystanders.

Certain dusts, such as oak or beech dust, are considered as

carcinogenic, especially in connection with wood-treatment

additives (chromate, wood preservative). Materials contain-

ing asbestos may only be worked by specialists.

– Always use dust extraction.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

rials to be worked.

The dust/chip extraction can be blocked by dust, chips or

workpiece fragments.

– Switch the machine off and pull the mains plug from the

socket outlet.

– Wait until the saw blade has come to a complete stop.

– Determine the cause of the blockage and correct it.

f Prevent dust accumulation at the workplace. Dusts can

easily ignite.

f To avoid the danger of fire when sawing aluminium,

empty the sawdust ejector and do not work with

dust/chip extraction.

Emptying the Sawdust Ejector (see figure F)

The sawdust ejector 31 can be emptied for removal of work-

piece fragments and large chips.

– Switch the machine off and pull the mains plug from the

socket outlet.

– Wait until the saw blade has come to a complete stop.

– Loosen fastening screw 41 with Allen key 21.

– Pull out sawdust ejector 31 and remove workpiece frag-

ments and chips.

– Mount the sawdust ejector to the power tool again.

External Dust Extraction (see figure G)

To connect a vacuum cleaner to the sawdust ejector 31, use

the supplied extraction adapter 32.

– Firmly attach the extraction adapter 32 and the vacuum

hose.

– Additionally, a dust extraction system can be connected

with the Y-adapter (accessory) to vacuum connection 7, to

increase the extraction performance.

The vacuum cleaner must be suitable for the material being

worked.

When vacuuming dry dust that is especially detrimental to

health or carcinogenic, use a special vacuum cleaner.

Stationary or Flexible Mounting

f To ensure safe handling, the machine must be mounted

on a level and stable surface (e. g., workbench) prior to

using.

Mounting to a Working Surface (see figure H)

– Fasten the power tool with suitable screw fasteners to the

working surface. The mounting holes 12 serve for this pur-

pose.

Mounting to a Bosch Saw Stand (see figure I)

With the height-adjustable legs, Bosch saw stands (e. g.

GTA 60 W, GTA 600) provide firm support for the power tool

on any surface.

f Read all safety warnings and instructions included with

the worktable. Failure of observing safety warnings and

instructions can lead to electrical shock, fire and/or cause

serious injuries.

f Assemble the worktable properly before mounting the

power tool. Perfect assembly is important in order to pre-

vent the risk of collapsing.

– Mount the power tool in transport position on the saw

stand.

Changing the Saw Blade (see figures J1– J4)

f Before any work on the machine itself, pull the mains

plug.

f When mounting the saw blade, wear protective gloves.

Danger of injury when touching the saw blade.

Use only saw blades whose maximum permitted speed is

higher than the no-load speed of the power tool.

Use only saw blades that correspond with the characteristic

data given in these operation instructions and that are tested

and marked in accordance with EN 847-1.

Use only saw blades recommended by the tool manufacturer,

and suitable for sawing the materials to be cut.

Removing the Saw Blade

– Using a screwdriver, raise the insert plate 24 at the front

and remove it from the tool basin.

– Turn crank 19 clockwise to the stop, so that the saw blade

26 is in the highest possible position above the saw table.

– Tilt the protection guard 6.x toward the rear to the stop.

– Turn the clamping nut 42 with the ring spanner 22

(23 mm) and at the same time, pull the spindle lock lever

43 until it engages.

– Keep the spindle lock lever pulled and unscrew the clamp-

ing nut turning in anticlockwise direction.

– Remove the clamping flange 44.

OBJ_BUCH-1325-002.book Page 32 Thursday, May 12, 2011 1:51 PM

Содержание

Похожие устройства

OBJ BUCH 1325 002 book Page 32 Thursday May 12 2011 1 51PM 321 English Insertthefasteningscrews through the lateral holes in the Firmly attach the extraction adapter 32 and the vacuum parallel guide 10 The heads of the screws serve as a guide for the auxiliary parallel guide hose Additionally a dust extraction system can be connected with the Y adapter accessory to vacuum connection 7 to Move the auxiliary parallel guide 37 over the heads of the fastening screws Mount the washers to the fastening screws and tighten them with the wing nuts Mounting the Anglestop see figuresEl E2 I nsert the gui de rai 139 of the angle stop 3 in to one of the guidegrooves 5 of the saw tableintended for this purpose For improved placement of long workpieces the angle stop increase the extraction performance The vacuum cleaner must be suitable for the material being worked When vacuuming dry dust that is especially detrimental to health or carcinogenic use a special vacuum cleaner Stationary or Flexible Mounting To ensure safe handling the machine must be mounted on a level a nd sta ble surf ace e g workbench prior to using can be extended with profile rail 28 If required mount the profile rail to the angle stopwi th fastening kit40 Du st Chip Extraction Dusts from materials such as lead containing coatings some wood types minerals and metal can be harmful to one s health Touching or breathing in the dusts can cause allergic reactions and or lead to respiratory infections of the user or bystanders Certain dusts such as oak or beech dust are considered as Mounting to a Working Surface see figure H Fastenthepowertoolwithsuitablescrewfastenerstothe working surface The mounting holes 12 serve for this pur pose Mounting to a Bosch Saw Stand see figure I With the height adjustable legs Bosch saw stands e g GTA 60 W GTA 600 provide firm support for the power tool on any surface carcinogenic especially in connection with wood treatment Read all safety warningsand instructions included with additives chromate wood preservative Materials contain the worktable Failure of observing safety warnings and ing asbestos may only be worked by specialists instructionscan lead to electrical shock fire and or cause serious injuries Always usedustextraction Provide for good ventilation of the working place It is recommended to wear aP2 filter class respirator Observe therelevant regulations in your country for the mate rials to be worked The dust chip extraction can be blocked by dust chips or workpiece fragments Switch the machine off and pull the mains plug from the socket outlet Wait until the saw blade has come to a complete stop Determine the cause of the blockage and correct it Prevent dust accumulationat the workplace Dusts can easily ignite To avoid the danger of firewhen sawing aluminium empty the sawdust qector and do not work with dust chip extraction Assembletheworktable properly beforemountingthe power tool Perfect assembly is important in order to pre vent the risk of collapsing Mountthe power tool in transport position on the saw stand Changing the Saw Blade see figures J1 J4 Before any work on the machine itself pull the mains plug Whenmountingthesawblade wear protectivegloves Danger of injury when touching the saw blade Useonlysawbladeswhosemaximumpermittedspeedis higher than the no load speed of the power tool Use only saw blades that correspond with the characteristic data given in these operation instructions and that are tested and marked in accordance with EN 847 1 Emptying theSawdust Eject or see figure F The sawdust ejector 31 can be emptied for removal of work piece fragments and large chips Switch the machine off and pull the mains plug from the socket outlet Wait until the saw blade has come to a complete stop Loosen fastening screw 41 with Allen key 21 Pul I out sawdust ej ector 31 and remove workpi ece frag men ts and chips Mount thesawdust ejector to the power tool again External Dust Extraction see figure G Use only saw blades recommended by the tool manufacturer and suitable for sawing the materials to be cut Remov ing the Sa w B la de Using a screwdriver raise the insert plate 24 at the front and remove it from the tool basin Turn crank 19 clockwise to the stop so that thesaw blade 26 is in the highest possible position above the saw table Tilt the protection guard 6 x toward the rear to the stop Turn the clamping nut 42 with the ring spanner 22 23 mm and at the same time pull the spindle lock lever 43 until it engages To connect a vacuum cleaner to the sawdust ejector 31 use Keep the spindle lock lever pulled and unscrew the clamp thesupplied extraction adapter 32 ing nut turning in anticlockwise direction Remove the cl amping flange 44 1619 929 J531 12 5 11 Bosch Power Tools A

Скачать