Tp-Link TL-SG2424 [30/130] Port mirror

atus: Allows you to Enable/Disable the port. When Enable is selected,

the port can forward the packets normally.

Speed and Duplex: Select the Speed and Duplex mode for the port. The device

connected to the switch should be in the same Speed and

Duplex mode with the switch. When “Auto” is selected, the

Speed and Duplex mode will be determined by auto-negotiation.

For the SFP port, this Switch does not support auto-negotiation.

Flow Control: Allows you to Enable/Disable the Flow Control feature. When

Flow Control is enabled, the switch can synchronize the speed

with its peer to avoid the packet loss caused by congestion.

LAG: Displays the LAG number which the port belongs to.

Note:

1. The switch can not be managed through the disabled port. Please enable the port which is

used to manage the switch.

2. The parameters of the port members in a LAG should be set as the same.

3. When using the SFP port with a 100M module or a gigabit module, you need to configure its

corresponding Speed and Duplex mode. For 100M module, please select 100MFD while

select 1000MFD for gigabit module. By default, the Speed and Duplex mode of SFP port is

1000MFD.

5.1.2 Port Mirror

Port Mirror, the packets obtaining technology, functions to forward copies of packets from

one/multiple ports (mirrored port) to a specific port (mirroring port). Usually, the mirroring port is

connected to a data diagnose device, which is used to analyze the mirrored packets for monitoring

and troubleshooting the network.

Choose the menu Switching→Port→Port Mirror to load the following page.

Figure 5-2 Mirroring Port