Tp-Link TL-WPA271 [34/51] Powerline

TL-WPA281/TL-WPA271 Wireless N Powerline Extender

¾ Received Packets - Packets received by the station.

¾ Sent Packets - Packets sent by the station.

You cannot change any of the values on this page. To update this page and to show the current

connected wireless stations, click the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the

next page and click the Previous button to return to the previous page.

)

Note:

This page will be refreshed automatically every 5 seconds.

3.6 Powerline

There are three submenus under the Powerline menu (shown in Figure 3-10): Network Settings,

Station Settings and QoS Setting. Click any of them, and you will be able to configure the

corresponding function. The detailed explanations for each submenu are provided below.

Figure 3-20 Wireless menu

3.6.1 Network Settings

Selecting Powerline > Network Settings, and you can configure the network name of the Powerline

Extender or all the stations in current network on this page.

Figure 3-21 Network Settings

¾ MAC Address - The physical address of the Powerline Extender, as seen from the powerline. The

value can not be changed.

¾ Device Password - The password of the Powerline Extender. The value can not be changed.

¾ Network Name - Enter the network name (factory default - HomePlugAV).

Click the Default button to enter the default network name.

Click the Set Local button to set the Powerline Extender.

Click the Set All button to set all stations which entered the correct passwords in current network,

including the Powerline Extender.