Tp-Link TD-W8901GB Инструкция по эксплуатации онлайн [35/67] 39408

TD-W8901GB 54M Wireless ADSL2+ Modem Router User Guide

Figure 4-14

¾ Access point Settings: These are the settings of the access point. You can configure the

rules to allow wireless-equipped computers and other devices to communicate with a

wireless network.

• Access point: Select Activated to allow wireless station to associate with the access

point.

• Channel: Select the channel you want to use from the drop-down List of Channel. This

field determines which operating frequency will be used. It is not necessary to change

the wireless channel unless you notice interference problems with another nearby

access point.

• Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval

value indicates the frequency interval of the beacon. A beacon is a packet broadcast by

the Router to synchronize the wireless network. The default value is 100.

• RTS/CTS Threshold: Should you encounter inconsistent data flow, only minor reduction

of the default value 2347 is recommended. If a network packet is smaller than the preset

RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends

Request to Send (RTS) frames to a particular receiving station and negotiates the

sending of a data frame. After receiving an RTS, the wireless station responds with a