Tp-Link TL-WR340G Инструкция по эксплуатации онлайн [21/72] 39528

TL-WR340G/TL-WR340GD 54M Wireless Router User Guide

are not sure which connection type you use currently, please contact your ISP to obtain the

correct information.

1. If you choose Dynamic IP, the router will automatically get IP parameters from your ISP.

You can see the page as follows (Figure 3-4):

Figure 3-4 WAN – Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP

address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP

parameters from your ISP. Click the Release button to release the IP parameters.

¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks

is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and

should not be done unless you are sure it is necessary for your ISP connection.

If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter

the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will

be assigned dynamically from your ISP.

)

Note:

If you get address and find error when you go to a Web site, it is likely that your DNS servers are

set up improperly. You should contact your ISP to get DNS server addresses.

¾ Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast

applications. If you cannot get the IP Address normally, you can choose this option. (This is

rarely required.)