Fluke 773 [2/26] Warranty
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for 3 years (one year for cable and
clamp) from the date of purchase. Parts, product repairs, and services are warranted for 90 days. This
warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does
not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused,
altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling.
Fluke warrants that software will operate substantially in accordance with its functional specifications for 90
days and that it has been properly recorded on non-defective media. Fluke does not warrant that software
will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers
only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is
available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the
applicable international price. Fluke reserves the right to invoice Buyer for importation costs of
repair/replacement parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair,
or replacement of a defective product which is returned to a Fluke authorized service center within the
warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return
authorization information, then send the product to that service center, with a description of the difficulty,
postage and insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following
warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal
condition of operation or handling, including overvoltage failures caused by use outside the product’s
specified rating, or normal wear and tear of mechanical components, Fluke will provide an estimate of repair
costs and obtain authorization before commencing the work. Following repair, the product will be returned to
the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges
(FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or
limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not
apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other
decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other
provision.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
Содержание
- 773 calibration manual 1
- Warranty 2
- Table of contents 3
- List of tables 5
- List of figures 7
- Introduction 9
- Xw warning 9
- How to contact fluke 10
- Safety information 10
- Xw warning 10
- Dc current measurement 12
- Dc voltage measurement 773 12
- Electrical specifications 12
- Specifications 12
- Symbols 12
- Table 1 refers to the symbols that are on the meter or in this manual 12
- Dc voltage source 773 13
- Environmental specifications 13
- General specifications 13
- Ma dc in out 773 13
- Mechanical specifications 13
- Milliamp process clamp meter 13
- Other specifications 13
- Scaled ma dc current output to ma current input from the jaw 773 13
- Standards and agency approval specifications 13
- Basic maintenance 14
- Battery replacement 14
- How to clean the meter 14
- Xw warning 14
- A message from 15
- Fluke corporation 15
- Static awareness 15
- Do not do the verification tests or calibration adjustment in this manual unless qualified 17
- Milliamp process clamp meter 17
- Performance tests 17
- Repairs or meter servicing must be done only by qualified personnel 17
- Required equipment 17
- Required equipment for the performance tests is in table 2 if the recommended models are not available equipment with equivalent specifications can be used 17
- The tests that follow verify the functions of the meter if the meter fails the verification tests repair is necessary for meter servicing see how to contact fluke 17
- To prevent electrical shock personal injury or fire 17
- Xw warning 17
- Backlight test 18
- Display hold test 18
- How to test the batteries 18
- How to test the display 18
- Measurement spotlight led test 18
- Xw warning 18
- Accuracy specifications are valid for 1 year after calibration adjustment when measured at an operation temperature of 18 c to 28 c allow the meter to stabilize at room temperature prior to performing the accuracy tests 19
- Accuracy tests 19
- Ma dc clamp measure accuracy tests 19
- Ma dc measure accuracy tests 19
- Milliamp process clamp meter 19
- The following tables list the required performance test points for verifying meter accuracy zero the meter prior to completing each measurement point 19
- Before you start calibration adjustment let the meter stabilize to room temperature 20
- Calibration adjustment 20
- Ma dc source accuracy tests 20
- The meter features closed case calibration adjustment with a known reference source the meter measures the applied reference source calculates correction factors and keeps the correction factors in nonvolatile memory 20
- Volts dc measure accuracy tests 20
- Volts dc source accuracy tests 20
- Calibration error messages 22
- In measure mode the shown value is the calibrator input 22
- In source mode the shown value is the meter output 22
- Push the calibration button a second time to keep new calibration constants and exit calibration mode 22
- Table 4 shows the meter buttons you use to adjust the meters calibration 22
- The calibration error messages that the meter can show are in table 5 steps to remove the messages are also shown in the table 22
- The meter display shows the value in each adjustment step 22
- To exit calibration mode 22
- Ma dc clamp measure adjustment procedure 23
- Ma dc measure adjustment procedure 23
- Milliamp process clamp meter 23
- To adjust the clamp measure function use the calibrator to apply the necessary meter input and do the steps in table 6 23
- To adjust the ma measure function use the calibrator to apply the necessary meter input and do the steps in table 7 23
- To adjust the volt measure function use the calibrator to apply the necessary meter input and do the steps in table 8 23
- Volts dc measure adjustment procedure 23
- Ma dc source adjust procedure 24
- To adjust the ma source function use the calibrator to apply the necessary meter input and do the steps in table 9 24
- To adjust the volt source function use the calibrator to apply the necessary meter input and do the steps in table 10 24
- Volts dc source adjust procedure 773 only 24
- Milliamp process clamp meter 25
- Replaceable parts 25
- Table 11 and figure 5 show all replaceable parts 25
- Calibration manual 26
- Figure 5 replaceable parts 26
Похожие устройства
- Fluke 772 Положение об энергозависимости памяти
- Fluke 772 Приложение к Инструкции
- Fluke 772 Clamp Meter data sheet
- Fluke 772 Руководство по калибровке
- Fluke 771 Приложение к Инструкции
- Fluke 771 Приложение к руководству по калибровке
- Fluke 771 Руководство по калибровке
- Fluke 715 Положение об энергозависимости памяти
- Fluke 715 Loop Calibrators Data Sheet
- Fluke 715 Приложение к Инструкции
- Fluke 718 Приложение к Руководству по эксплуатации
- Fluke 712 Приложение к Инструкции
- Fluke 714 Приложение к Инструкции
- Fluke 717 Приложение к руководству по калибровке
- Fluke 717 Приложение к Инструкции
- Fluke 717 Руководство по калибровке
- Fluke 714 Приложение к руководству по калибровке
- Fluke 714 Руководство по калибровке
- Fluke 712 Приложение к руководству по калибровке
- Fluke 712 Руководство по калибровке
Скачать
Случайные обсуждения