D-Link DIR-645 [14/134] Connect to cable dsl satellite modem

10D-Link DIR-645 User Manual

Section 2 - Hardware Installation

Connect to Cable/DSL/Satellite Modem

If you are connecting the router to a Cable/DSL/Satellite Modem, please follow the steps below:

1. Place the router in an open and central location. Do not plug the power adapter into the router.

2. Turn the power o on your modem. If there is no on/o switch, unplug the modem’s power adapter. Shut down your computer.

3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet

port on the router.

4. Plug an Ethernet cable into one of the LAN ports on the router. Plug the other end into the Ethernet port on your computer.

5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).

6. Plug the power adapter into the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot

up.

7. Turn on your computer.

8. Verify that the Power LED on the router are lit. If the Power LED does not light up, make sure your computer, modem, and

router are powered, on and verify that the cables connected correctly.

9. In a later section in this manual we’ll discuss the Web GUI conguration of the router in more detail..