D-Link DIR-645 [41/134] Network settings

37D-Link DIR-645 User Manual

Section 3 - Software Conguration

Network Settings

Router IP

Address:

Enter the IP address of the router. The default IP

address is 192.168.0.1. If you change the IP address,

once you click Apply, you will need to enter the

new IP address in your browser to get back into

the conguration utility.

Default Subnet

Enter the Subnet Mask. The default subnet mask is

checked, your computers will use the router for a

DNS server.

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. This device has a built-in DHCP server. The DHCP Server will automatically assign an IP address

to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP

Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the router. The

DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting

and ending address of the IP address pool.

On this page the user can congure the internal network settings of the router and also able to congure the built-in DHCP server to assign IP

addresses to computers on the network. The IP address that is congured here is the IP address that is used to access the Web-based management