D-Link DIR-645 Инструкция по эксплуатации онлайн [37/134] 41204

33D-Link DIR-645 User Manual

Section 3 - Software Conguration

The following parameters will be available for conguration:

Wireless Band: Displays the wireless band being congured. In

this option we nd that the following parameters

will be regarding the 2.4GHz band.

Enable Wireless: Check the box to enable the wireless function. If

you do not want to use wireless, uncheck the box

to disable all the wireless functions. Select the time

frame that you would like your wireless network

enabled. The schedule may be set to Always. Any

schedule you create will be available in the drop-

down menu. Click New Schedule to create a new

schedule.

Wireless

Network Name:

The Service Set Identier (SSID) is the name of

your wireless network. Create a name using up to

32 characters. The SSID is case-sensitive. Enable

Auto Channel

802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network.

Enable Auto

Channel Scan:

The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of

interference.

Wireless

Channel:

By default the channel is set to 1. The Channel can be changed to t the channel setting for an existing wireless network or to

customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.

Transmission

Rate:

Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.

Channel Width: When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz bandwidth.

Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name

is broadcasted to anyone within the range of your signal. If you are not using encryption then they could connect to your

network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect

to the network.