D-Link DIR-645 Инструкция по эксплуатации онлайн [54/134] 41204

50D-Link DIR-645 User Manual

Section 3 - Software Conguration

IPv6 Connection Type: Static IPv6

In the following section we’ll discuss the parameters that can be congured when setting up an Static IPv6 connection. This mode is used when

your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 conguration settings.

You must enter the IPv6 address, Subnet Prex Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides

you with all this information.

The following parameters will be available for conguration:

Use Link-Local

Address:

The Link-local address is used by nodes and

routers when communicating with neighboring

nodes on the same link. This mode enables IPv6-

capable devices to communicate with each other

on the LAN side.

IPv6 Address: Enter the WAN IPv6 address for the router here.

Subnet Prex

Length:

Default

Gateway:

Enter the WAN default gateway IPv6 address used

here.

Primary DNS

Server:

Secondary DNS

Servers:

Enter the WAN primary DNS Server address used

here.

Enter the WAN secondary DNS Server address used

here.