D-Link DI-514 Инструкция по эксплуатации онлайн [18/60] 41528

PPPoE

Please be sure to remove

any Client Software program

on your computer before you

start your configuration of the

DI-514 Router.

Choose PPPoE (Point to

Point Protocol over Ethernet)

if your ISP uses PPPoE

connection. Your ISP will

provide you with a username

and password. This option is

typically used for DSL

services. Select Dynamic

PPPoE to obtain an IP

address automatically for

your PPPoE connection.

Select Static PPPoE to use a static IP address for your PPPoE connection.

Dynamic PPPoE: PPPoE connection where you will receive an IP address

automatically from your ISP

Static PPPoE: PPPoE connection where you have an assigned (static) IP

address

User Name: Your PPPoE username provided by your ISP

Password: Your PPPoE password provided by your ISP

Retype Password: Re-enter PPPoE password

Service Name: Enter the service name provided by your ISP. (optional)

IP Address: This option is only available for Static PPPoE. Enter in the

static IP address for the PPPoE connection.

Primary DNS Address: Primary DNS IP provided by your ISP

Secondary DNS Address: optional

Maximum Idle time: The amount of time of inactivity before disconnecting

your PPPoE session. Enter a Maximum Idle Time (in minutes) to define a

maximum period of time for which the Internet connection is maintained

during inactivity. If the connection is inactive for longer than the defined

Maximum Idle Time, then the connection will be dropped. Either set this to

zero or enable Auto-reconnect to disable this feature.

MTU: MTU stands for Maximum Transmission Unit. For PPPoE connections,

you may need to change the MTU settings in order to work correctly with

1492