D-Link DI-514 [24/60] Filters

The DI-514 provides some predefined applications in the table on the bottom

of the web page. Select the application you want to use and enable it.

Note! Only one PC can use each Special Application tunnel.

Trigger Name: This is the name referencing the special application.

Trigger Port: This is the port used to trigger the application. It can be either

a single port or a range of ports.

Trigger Type: This is the protocol used to trigger the special application.

Public Port: This is the port number on the WAN side that will be used to

access the application. You may define a single port or a range of ports. You

can use a comma to add multiple ports or port ranges.

Public Type: This is the protocol used for the special application.

Schedule: This is the schedule of time when the special application will be

enabled.

Filters

Filters are used to deny or

allow LAN (Local Area

Network) computers from

accessing the Internet.

The DI-514 can be setup

to deny internal

computers by their IP or

MAC addresses. The DI-

514 can also block users

from accessing restricted

web sites.

IP Filters

Use IP Filters to deny

LAN IP addresses from

accessing the Internet.

You can deny specific port

numbers or all ports for the specific IP address.

IP: The IP address of the LAN computer that will be denied access to the

Internet.

Port: The single port or port range that will be denied access to the Internet.

Schedule: This is the schedule of time when the IP Filter will be enabled.

Advanced > Filters