D-Link DI-514 [32/60] Device info

Block WAN Ping - When you “Block WAN Ping”, the DI-514 will not respond

to ping commands from the Internet. Pinging public WAN IP addresses is a

common method used by hackers to test whether your WAN IP address is

valid.

Discard PING from WAN side: By enabling this option, the DI-514 will not

reply to ping (ICMP) request packets from the Internet.

VPN Pass-Through - The Broadband Router supports VPN (Virtual Private

Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol)

and IPSec (IP Security). Once VPN pass-through is enabled, there is no

need to open up virtual services. Multiple VPN connections can be made

through the Broadband Router. This is useful when you have many VPN

clients on the LAN network.

Dynamic DNS - Fill in the required fields to use the Dynamic Domain Server

feature.

Status > Device Info

Device Information

This page in the

Configuration Utility

displays the current

information for the

Broadband Router. It will

display the LAN and WAN,

Wireless information.

If your WAN connection is

set up for Dynamic IP

address a Release button

and Renew button will be

displayed. Use Release to

disconnect from your ISP

and use Renew to connect

to your ISP.

If your WAN connection is set up for PPPoE, a Connect button and

Disconnect button will be displayed. Use Disconnect to drop the PPPoE

connection and use Connect to establish the PPPoE connection.

This page allows you to observe the DI-514’s working status: