D-Link DI-514 [36/60] Troubleshooting

Troubleshooting

2. The wireless client cannot access the Internet in the Infrastructure

mode.

• Make sure the wireless client is associated and joined with the correct

router. To check this connection: Right-click on the Local Area

Connection icon in the taskbar> select View Available Wireless

Networks. The Connect to Wireless Network screen will appear.

Please make sure you have selected the correct available network, as

shown in the illustrations below.

• Check that the IP Address assigned to the wireless adapter is within

the same IP Address range as the gateway. Since the DI-514 has

an IP Address of 192.168.0.1, wireless adapters must have an IP

Address in the same range, e.g., 192.168.0.x. Each device must

have a unique IP Address; no two devices may have the same IP

Address. The subnet mask must be the same for all the computers

on the network.) To check the IP Address assigned to the wireless

adapter, double-click on the Local Area Connection icon in the

taskbar > select the Support tab and the IP Address will be

displayed. (Please refer to Checking the IP Address in the

Networking Basics section of this manual.)

• If it is necessary to assign a Static IP Address to the wireless

adapter, please refer to the appropriate section in Networking

Basics. If you are entering a DNS Server address you must also

enter the Default Gateway Address. (Remember that if you have a

DHCP-capable router, you will not need to assign a Static IP Address.

See Networking Basics: Assigning a Static IP Address.)

Default