Hotpoint-Ariston C3V M57 W RU [3/24] Ariston

Содержание

ARISTON 5 Fix the power supply cable in place by fastening the cable clamp screw 6 Close the terminal board cover by tightening the screws V Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate located on the appliance The appliance must be directly connected to the mains using an omnipolar circuit breaker with a minimum contact opening of 3 mm installed between the appliance and the mains The circuit breaker must be suitable for the charge indicated and must comply with current electrical regulations the earthing wire must not be interrupted by the circuit breaker The supply cable must be positioned so that it does not come into contact with temperatures higher than 50 C at any point Before connecting the appliance to the power supply make sure that The appliance is earthed and the plug is compliant with the law The socket can withstand the maximum power of the appliance which is indicated by the data plate The voltage is in the range between the values indicated on the data plate The socket is compatible with the plug of the appliance If the socket is incompatible with the plug ask an authorised technician to replace it Do not use extension cords or multiple sockets TECHNICAL DATA GB Oven dimensions HxWxD Volume Useful measurements relating to the oven compartment Power supply voltage and frequency Ceramic hob Front Lett Back Lett Back Right Front Right Max ceramic hob consumption 34x44x39 cm 581 width 42 cm depth 44 cm height 17 cm see data plate 1200 W 1800 W 1200 W 1800 W 6000 W Directive 2002 40 EC on the label ot electric ovens Standard EN 50304 Energy consumption tor Natural ENERGY LABEL convection heating mode Q Static Declared energy consumption tor Forced convection Class heating mode S Fan assisted EC Directives 73 23 EEC dated 19 02 73 Low Voltage and subsequent amendments 89 336 EEC dated 03 05 89 Electromagnetic Compatibility and subsequent amendments 93 68 EEC dated 22 07 93 and subsequent amendments 2002 96 EC Once the appliance has been installed the power supply cable and the electrical socket must be easily accessible The cable must not be bent or compressed The cable must be checked regularly and replaced by authorised technicians only The manufacturer declines any liability should these safety measures not be observed Only available in certain models 3