D-Link DCS-4603 [28/66] Network setup

28D-Link DCS-4603 User Manual

Section 3: Conguration

Network Setup

Use this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any

changes, click the Save Settings button to save your changes.

LAN Settings:

DHCP:

Static IP Client:

Enable UPnP

Presentation:

This section lets you congure settings for your local area network.

Select this connection if you have a DHCP server running on your network

and would like your camera to obtain an IP address automatically.

If you choose DHCP, you do not need to ll out the IP address settings.

You may obtain a static or xed IP address and other network information

from your network administrator for your camera.

IPv4 Address: Enter the IP address that the camera will use on your

network. You may need to get this information from your ISP or network

administrator.

Subnet Mask: The default value is “255.255.255.0.” Used to determine if the

destination is part of the same subnet.

Default Router: The router used to forward frames to destinations

in a dierent subnet. Invalid router settings may cause the failure of

transmissions to a dierent subnet.

Optional Primary DNS: Primary domain name server that translates names

to IP addresses.

Optional Secondary DNS: Secondary domain name server to backup the

Primary DNS.

Enabling this setting allows your camera to be congured as a UPnP device

on your network.