D-Link DCS-7000L [34/63] Wireless setup

34D-Link DCS-7000L User Manual

Section 4: Conguration

Wireless Setup

This section allows you to set up and congure the wireless settings on your camera.

After making any changes, click the Save Settings button to save your changes.

Site Survey:

SSID:

Wireless Mode:

Channel:

Authentication:

Encryption:

Key:

Click the Rescan button to scan for available wireless networks. After

scanning, you can use the drop-down box to select an available

wireless network. The related information (SSID, Wireless Mode,

Channel, Authentication, Encryption) will be automatically lled

in for you.

Enter the SSID of the wireless access point you wish to use.

Use the drop-down box to select the mode of the

wireless network you wish to connect to. Infrastructure is

normally used to connect to an access point or router. Ad-Hoc is

usually used to connect directly to another computer.

If you are using Ad Hoc mode, select the channel of the wireless

network you wish to connect to, or select Auto.

Select the authentication you use on your wireless network -

Open, Shared, WPA-PSK, or WPA2-PSK.

If you use WPA-PSK or WPA2-PSK authentication, you will need

to specify whether your wireless network uses TKIP or AES

encryption. If you use Open or Shared authentication, WEP

encryption should be the setting.

If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the

Key (also known as password) used for your wireless network.