Tp-Link TX-6610 V4 [10/28] Chapter 2 connecting the terminal

TX-6610

1-Port Gigabit GPON Terminal User Guide

Chapter 2. Connecting the Terminal

2.1 System Requirements

 Broadband Internet Access Service (GPON).

 PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.

 TCP/IP protocol on each PC.

 Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

2.2 Installation Environment Requirements

 The Product should not be located where it will be exposed to moisture or excessive heat.

 Place the Terminal in a location where it can be connected to the various devices as well as to

a power source.

 Make sure the cables and power cord are safely placed out of the way so they do not create a

tripping hazard.

 The Terminal can be placed on a shelf or desktop.

 Keep away from the strong electromagnetic radiation and the device of electromagnetic

sensitive.

2.3 Connecting the Terminal

Before installing the device, please make sure your broadband service provided by your ISP is

available. If there is any problem, please contact your ISP. Before cable connection, cut off the

power supply and keep your hands dry. You can follow the steps below to install it.

Step 1: Connect the fiber. Plug one end of the fiber into the GPON port on the rear panel of

TX-6610, and insert the other end into the wall socket.

Step 2: Connect the Ethernet cable. Attach one end of a network cable to your computer’s

Ethernet port or a regular hub/switch port, and the other end to the LAN port on the

TX-6610.

Step 3: Power on the computers and LAN devices.

Step 4: Attach the power adapter. Connect the power adapter to the power connector on the rear

of the device and plug in the adapter to an electrical outlet or power extension. The

electrical outlet shall be installed near the device and shall be easily accessible.

Step 5: Press the ON/OFF button of your Terminal.