Helo RING WALL 60 ST [6/14] Product manual lumi

2.5 Sauna heater controls

2.5.1 Timer switch

The sauna heater is controlled by operating a 12-hour timer with three operating zones. The timer is set by twisting the knob

clockwise until the desired operating zone is reached. When operating, the timer gradually travels counter-clockwise towards

the zero position.

1. 0 position. The sauna heater is not on.

2. Operating zone 1–4 hours. Set on this zone, the sauna

heater heats up at full power while the sauna thermostat

controls the temperature.

3. Preset zone 1–8 hours. Set on this zone, the sauna heater

can be preset to turn on after a certain period of time. The

heating elements will not heat up when the timer is within

this zone.

Before turning the sauna heater on, make sure the sauna room

is suitable for taking a sauna bath.

The timer operates better if it is first turned further than the desired time

and then turned back to the desired time. If the switch has not travelled

back to 0 position after finishing bathing, turn it to 0 manually.

2.5.2 Thermostat

The thermostat knob is next to the timer knob. The further

right (clockwise) the timer is switched, the higher the

temperature will rise in the sauna room. The best way to find

the ideal temperature is to first turn the thermostat fully on

the right and let the temperature rise to the desired temperature.

Subsequently, turn the thermostat knob slowly counter-clockwise

until you hear a gentle clicking sound. If you want to readjust the

temperature, turn the thermostat gradually until the temperature

is ideal.

The thermostat will not operate correctly if the stones are piled too

densely or they are too small. Please refer to section ”Sauna heater

stones” on page 5

The thermostat has an integrated temperature limiter with a reset switch

next to the thermostat knob.

PALAUTUS RETUR RESETTING

Product Manual LUMI