Dometic SINEPOWER DSP 424 [11/248] Safety when installing the device

SinePower General safety instructions

NOTICE!

• Before start-up, check that the voltage specification on the type plate

is the same as that of the power supply.

• Ensure that other objects cannot cause a short circuit at the contacts

of the device.

• Never pull the plug out of the socket by the connection cable.

• Store the device in a dry and cool place.

2.3 Safety when installing the device

DANGER!

• Never mount the device anywhere where there is a risk of gas or dust

explosion.

CAUTION!

• Ensure that the device is standing firmly.

The device must be set up and fastened in such a way that it cannot tip

over or fall down.

NOTICE!

• Do not expose the device to a heat source (such as direct sunlight or

heating). Avoid additional heating of the device in this way.

• Set up the device in a dry location where it is protected against splash-

ing water.

2.4 Safety when connecting the device electronically

DANGER! Danger of electrocution

• If you are working on electrical systems, ensure that there is somebody

close at hand who can help you in emergencies.

WARNING!

• Never connect more than one consumer device to the inverter. If you

connect more than one device, a short circuit may occur.

• Make sure that the lead has a sufficient cross-section.

• Lay the cables so that they cannot be damaged by the doors or the

bonnet.

Crushed cables can lead to serious injury.

DSP200-400--IO-16s.book Seite 11 Donnerstag, 30. November 2017 8:37 08