Dometic SINEPOWER DSP 424 [17/248] Using the inverter

SinePower Using the inverter

➤ Connect the inverter as shown:

– Connecting the battery:

DSP212, DSP224: fig. 5, page 5

DSP412, DSP424: fig. 6, page 5

– Connecting load: fig. 7, page 6

Connect external switch to turn device on and off (DSP412, DSP424 only)

➤ Connect the external switch as shown (fig. 8, page 6).

8Using the inverter

8.1 Switching on the inverter

➤ Switch the inverter on by pressing the switch (fig. 2 1, page 3) on the device

(position “I”) …

➤ … or (DSP412, DSP424 only) switch on the inverter using the external switch

(optional).

✓ The blue Status LED lights up (fig. 2 2, page 3).

✓ The power consuming device is supplied with voltage.

NOTICE!

• Incorrect polarity will blow an internal fuse which has to be replaced

by the Dometic service. Additionally the electronics may be dam-

aged.

• Make sure that the inverter is operated with the following voltage

only:

– DSP212, DSP412: 12 Vg

– DSP224, DSP424: 24 Vg

NOTE

The inverter is switched on when the external or the main switch

(fig. 2 1, page 3) is switch on. If the inverter shall be controlled via

external switch only, the main switch has to be switch to position “0”.

CAUTION!

When connecting the load observe the applicable regulations.

DSP200-400--IO-16s.book Seite 17 Donnerstag, 30. November 2017 8:37 08