Monsher Kvazi 60 W [10/32] Presoak it in hot water with a potent detergent and wash every 1 2 months

English

7.4 CAUTION! BEFORE CLEANING, SWITCH THE COOKER HOOD OFF.

7.5 Use wet cloth moisturized in warm water with a neutral detergent to clean

external painted surfaces of the hood. Clean stainless steel surfaces with dedicated

agents as per appropriate guidelines.

7.6 Do not clean the cooker hood with abrasive detergents, coarse sponges or

cleaning agents containing soda ash, acids, chlorides or solvents.

7.7 During washing avoid contact of conductive parts with water. After the procedure

clean a surface with a soft cloth.

7.8 Clean wooden edging with furniture polish.

7.9 Since an aluminium filter becomes obstructed with airborne grease and dust,

presoak it in hot water with a potent detergent and wash every 1.5 – 2 months.

Washing-induced discoloration of a filter has no impact on performance quality.

7.10 To remove the aluminium filter (Fig. 6), press on the spring sliding part and,

pulling down, remove the filter from the panel. Install the filter in the reverse order.

Do not install filter after washing until it is completely dry.

7.11 Replace (optional) carbon filters used during recirculation mode every 3 – 6

months depending on the intensity of using of the hood. To install the filters on a

T-shaped pin of a turbofan lid, axial pressure and clockwise rotation are required.

7.12 LED backlight lamps are installed in the cooker hood to illuminate a cooktop.

Before starting to replace the light bulbs, switch the cooker hood off and allow them

to cool down. To replace a bulb, remove an aluminium filter, depress a bulb holder

carrier such that the lamp released from the housing of the cooker hood and turn

it counterclockwise (Fig.7). Then, install a new one with the same characteristics

and insert the filter.