Epson Stylus Pro XL+ Инструкция по эксплуатации онлайн [249/573] 49393

R-18 Select Characters
3 The printer stores user-defined characters in RAM memory; you must tell the
printer to find characters in RAM memory if you want to print user-defined
characters. If you plan to use many of the standard characters along with
your user-defined characters, use the ESC : command to copy the currently
selected character table to the printer’s RAM memory. This allows you to
print user-defined characters without having to switch from ROM to RAM
characters and back again each time.
4 Define and send the data to the printer’s RAM memory using the ESC &
command.
5 Switch to RAM characters. The printer then uses the user-defined characters
when printing text.
Note:
On 24/48-pin printers, you can use the ESC t 2 command to copy character
data (including user-defined characters) from codes 0 to 127 to codes 128 to
255. This is desirable if you wish to print codes between 0 and 127 as usual
while having access to user-defined characters.
If you plan to use the ESC t 2 command to access user-defined characters on
an ESC/P 2 printer, make sure you do not assign a registered character table
to active Table 2 with the ESC ( t command. Once you have assigned a
registered table to Table 2, you cannot use it for user-defined characters (until
you reset the printer with the ESC @ command).

Содержание

Скачать