IKA ROCKER 3D basic 0004000000 [12/52] Safety instructions

IKA ROCKER 3D basic 0004000000 [12/52] Safety instructions
12
Safety instructions
Unpacking
Unpacking
- Please unpack the device carefully.
- In the case of any damage a detailed report must be sent
immediately (post, rail or forwarder).
Fig. 1
The appliance is not suitable for manual operation.
Beware of the risk of
- flammable materials
- glass breakage as a result of mechanical shaking power
The appliance may heat up when in use.
Only process media that will not react dangerously to the extra
energy produced through processing. This also applies to any
extra energy produced in other ways, e.g. through light irradia-
tion.
Process pathogenic materials only in closed vessels under a
suitable extractor hood. Please contact IKA
®
if you have any
questions.
• Do not operate the appliance in explosive atmospheres, with
hazardous substances or under water.
Safe operation is only guaranteed with the accessories descri-
bed in the ”Accessories” chapter.
Always disconnect the plug before fitting accessories.
Disconnect the device from the power supply before you open
the cover or adjust the inclination angle of the device shaking
table.
Do not operate the device with the cover open.
The appliance can only be disconnected from the mains supply
by pulling out the mains plug or the connector plug.
The socket for the mains cord must be easily accessible.
The IKA
®
Rocker 3D basic does not restart automatically
when power is restored after a power outage. If the IKA
®
Rocker 3D digital is running in mode A it does not restart
automatically when power is restored after a power outage.
For protection of the equipment
The appliance may only be opened by experts.
The voltage stated on the type plate must correspond to the
mains voltage.
Removable parts must be refitted to the appliance to prevent
the infiltration of foreign objects, liquids etc..
• Protect the appliance and accessories from bumps and impacts.
The device must only be operated with the original plug-in po-
wer supply unit.
For your protection
Read the operating instructions in full before
starting up and follow the safety instructions.
Keep the operating instructions in a place where they can be
accessed by everyone.
Ensure that only trained staff work with the appliance.
Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
Wear your personal protective equipment in accordance with
the hazard category of the medium to be processed. Otherwise
there is a risk of:
- splashing liquids
- projectile parts
- body parts, hair, clothing and jewellery getting caught.
Set up the device in a spacious area on an even, stable, clean,
non-slip, dry and fireproof surface
.
The feet of the appliance must be clean and undamaged.
Check the appliance and accessories beforehand for damage
each time you use them. Do not use damaged components.
Caution! There is a crush hazard between the mo-
ving shaking table and the casing.
Place the vessels securely on the shaking table or on the chosen
mat or rack.
Firmly secure the accessories and vessels in place, otherwise
shaking vessels could be damaged or projected out.
Position one single shaking vessel in the centre and several
shaking vessels so that they are evenly spread out.
Always load the samples evenly on the device.
The weight of the load must not exceed 2 kg. Do not exceed
the maximum permissible shaking weights.
Do not move or transport the device when it is operating or
connected to the power supply.
Reduce the speed if
- the medium splashes out of the vessel because the speed is
too high
- the appliance is not running smoothly
-
dynamic forces start to cause the device and/or the vessels
placed on it to move around.
• Delivery scope
IKA
®
Rocker 3D basic/ digital
- IKA
®
Rocker 3D basic/digital, depending on the type that
was ordered
- Mat
- 4 AF hexagon L-wrench to DIN 911 (only digital)
- AC adapter, see Fig. 1
- Operating instructions
- Warranty card

Содержание

Скачать