![Clarion NX504E [2/7] Package contents](/img/pdf.png)
Clarion NX504E [2/7] Package contents
![Clarion NX504E [2/7] Package contents](/views2/1552857/page2/bg2.png)
NX504E/FX504E 55
English
❏
Connection Notes
WARNING
• Loom all cables according to the
instruction manual, so as not to
hinder operation.
• Wire the connecting cords/cables
away from high temperature areas.
If the coatings of the cables melt,
it could cause an accident/fire by a
short circuit. Take care when wiring
in the engine compartment.
• When wiring the connecting cables
in a vehicle with an airbag system,
never feed the cables through
a place where it may affect the
operation of the airbag.
An airbag not operating correctly in
an emergency may cause increased
injury.
CAUTION
• Verify wires with a digital multi-meter
prior to making any connections.
Many new vehicles use multiplexed
and/or low voltage circuits that can
be damaged if a test light or logic
probe is used.
• Connect cables appropriately. If a
wrong connection is made, this may
cause a fire or accident.
• When passing cables through
the body of the vehicle, use non-
conductive grommets.
If the coatings of the cables are
worn out by rubbing, this may cause
an accident, fire or a short circuit.
• After wiring cables, fix them with
insulation tape.
• Be sure to switch off the vehicle
when connecting or disconnecting
cables to/from the unit, otherwise
an electric shock, injury or accident
may occur.
2. PACKAGE CONTENTS
Main unit
Quick Start Guide & Installation
Manual
CD-ROM
•Owner's manual
•Owner's manual - Navigation (NX504E
only)
Power supply cable
RCA pin cable (6ch)
RCA pin cable (Rear AUX-IN/Rear
Video Out)
Bag for accessories
•Flat head screw (M5 × 8 mm)
............................................................8
•Hexagonal bolt (M5 × 8 mm)
............................................................8
•Electro tap...........................................1
•Rubber cap (for RCA pin cable)
..........................................................10
•Cable holder (NX504E only) ................3
•Double-sided tape for fastening GPS
antenna (NX504E only) .......................1
•Cable tie ..............................................1
Warranty card
GPS antenna (NX504E only)
USB Cable
Notice
•Theprovideddisc(CD-ROMmanual)
cannotbeplayedbackonthisunit.
3. GENERAL CAUTIONS
●
Do not open the case. There are no user-
serviceable parts inside. If you drop
anything into the unit during installation,
consult your dealer or an authorized
Clarion service center.
4. CAUTIONS ON INSTALLATION
●
Prepare all articles necessary for
installing the main unit before starting.
●
Install the unit within 35° of the horizontal
plane. (Figure 1)
Max. 35°
Figure 1
●
If you have to do any modification on the
car body, such as drilling holes, consult
your car dealer beforehand.
●
Use the included screws for installation.
Using other screws can cause damage.
(Figure 2)
Figure 2
Chassis Chassis
Damage
Max. 3 mm (M4 screw)/
Max. 8 mm (M5 screw)
Содержание
- Before use 1
- Caution 1
- Installation and wire connection manual 1
- Installation notes 1
- Installation precautions 1
- Safety precautions 1
- Symbol identification 1
- Warning 1
- Caution 2
- Cautions on installation 2
- Connection notes 2
- General cautions 2
- Package contents 2
- Warning 2
- Installing the main unit 3
- Installing the main unit in a nissan vehicle 3
- Mounting screw holes side view of the main unit 3
- Caution 4
- Cautions on wiring 4
- Installing the main unit in a toyota vehicle 4
- Removing the main unit 4
- Typical mounting brackets 4
- Vehicles other than nissan and toyota 4
- Dab antenna connection nx504e only 5
- Installing the gps antenna nx504e only 5
- Warning 5
- English 6
- Fx504e 6
- Nx504e 6
- Nx504e fx504e 59 6
- Wire connection 6
- Connect the lead to parking brake lamp ground in the meter panel connecting the parking brake lead to lamp ground allows you to watch video images when the parking brake is engaged when the parking brake lead is not connected the monitor will not display video images 7
- Connecting the accessories 7
- Connecting the parking brake lead 7
- Connection to the rear vision camera for vehicle 7
- See next page for how to connect the parking brake lead 7
- The rear vision camera for vehicle can be connected to optional rear vision camera input cable cca 644 with rca pin cable for detailed information refer to the instruction sheet or manual for the rear vision camera be sure to connect the reverse gear lead to the vehicle s relevant terminal connect the rear vision camera to the rca pin cable if not the screen turns black while the gearshift lever is in the reverse gear position 7
Похожие устройства
- Clarion NX702E Руководство по установке
- Clarion NX706E Руководство по установке
- Clarion VX404E Руководство по установке
- Clarion FX503E Руководство по установке
- Clarion DTX502E Руководство по установке
- Clarion CX501E Руководство по установке
- Clarion CZ104E Руководство по установке
- Clarion CZ215E Руководство по установке
- Clarion CZ315E Руководство по установке
- Clarion CZ505E Руководство по установке
- Clarion CZ703E Руководство по установке
- Clarion FZ102E Руководство по установке
- Clarion FZ502E Руководство по установке
- Clarion DAB302E Руководство по установке
- Clarion SRV250 Руководство по установке
- Clarion CMD8 Руководство по установке
- Clarion CMV1 Руководство по установке
- Clarion M109 Руководство по установке
- Clarion M303 Руководство по установке
- Clarion CC2003E Руководство по установке
Скачать
Случайные обсуждения