Zanussi FAE1025V [10/48] Detergent dispenser drawer

Zanussi FAE1025V [10/48] Detergent dispenser drawer
10
Use
1. Detergent dispenser drawer
Programme option buttons
Depending on the programme, different option
buttons can be combined.
When these buttons are pressed, the corresponding
lights come on. When they are pressed again, the
lights go off.
If an incompatible option with the selected
programme has been chosen, the corresponding
light flashes for about 2 seconds.
The option buttons:
PRE-WASH or QUICK WASH;
ECONOMY, SUPER RINSE and
RINSE HOLD must be selected after the
required programme has been chosen, by turning
the programme selector (see section 9) and before
starting the machine, by pressing button START
/ PAUSE.
2.
PRE-WASH or QUICK WASH
By pressing this button you have the possibility of
choosing between the following options:
PRE-WASH option: Adds a pre-wash phase
at the start of the cycle with water heating to 30° C.
In COTTON and SYNTHETIC cycles, performs a
short spin before passing to the washing phase.
This option cannot be selected for WOOL.
QUICK WASH option: Using this option, you
can get good washing results in a short period of
time, since with option, the COTTON,
SYNTHETICS, and DELICATES programmes are
modified in order to obtain short washing times
(recommended for small or lightly-soiled loads).
This modification consists of reducing the number of
rinse cycles (one less) and also increases the water
level used in the remaining two rinse cycles.
If both lights ( PRE-WASH and QUICK
WASH) are not illuminated the programme will run
without either PRE-WASH or QUICK WASH).
3. ECONOMY button
This option is available for COTTON programmes
(excluded D and F) and SYNTHETICS programmes
(excluded H and J). By selecting this button the
washing machine changes the washing phase
behaviour to have a cycle with better energy
performance (energy label cycle for cotton 60°) with
a longer cycle time.
4. SUPER RINSE button
Can be used with all programmes, except wool.
The machine will add 2 rinses to the selected
programme.
This option is recommended for people who are
allergic to detergents and in areas where the water
is very soft.
5. RINSE HOLD button
By selecting this button the water of the last rinse is
not drained. When the programme has finished the
light END goes on. Before opening the door the
water must be drained.
6. START / PAUSE button
After selecting the required programme, by the
programme selector (see section 9), press this
button to start the machine; the corresponding light
stops flashing and will keep lighting until the
programme finishes.
To interrupt the running programme, depress
START / PAUSE button: the corresponding
light starts to flash.
To restart the programme from the point at which it
was interrupted, press START / PAUSE button
again.
Control panel
12345678 9

Содержание

Use Control panel 1 Detergent dispenser drawer 3 LU ECONOMY button Programme option buttons This option is available for COTTON programmes excluded D and F and SYNTHETICS programmes excluded H and J By selecting this button the washing machine changes the washing phase behaviour to have a cycle with better energy performance energy label cycle for cotton 60 with a longer cycle time Depending on the programme different option buttons can be combined When these buttons are pressed the corresponding lights come on When they are pressed again the lights go off If an incompatible option with the selected programme has been chosen the corresponding light flashes for about 2 seconds 4 SUPER RINSE button Can be used with all programmes except wool The machine will add 2 rinses to the selected programme This option is recommended for people who are allergic to detergents and in areas where the water is very soft The option buttons LU PRE WASH or M QUICK WASH 111 ECONOMY 3 SUPER RINSE and RINSE HOLD must be selected after the required programme has been chosen by turning the programme selector see section 9 and before starting the machine by pressing button 0 START PAUSE 5 U RINSE HOLD button By selecting this button the water of the last rinse is not drained When the programme has finished the light I END goes on Before opening the door the water must be drained 2 LU PRE WASH or l J QUICK WASH By pressing this button you have the possibility of choosing between the following options 6 0 START PAUSE button LU PRE WASH option Adds a pre wash phase at the start of the cycle with water heating to 30 C In COTTON and SYNTHETIC cycles performs a short spin before passing to the washing phase This option cannot be selected for WOOL After selecting the required programme by the programme selector see section 9 press this button to start the machine the corresponding light stops flashing and will keep lighting until the programme finishes litU QUICK WASH option Using this option you can get good washing results in a short period of time since with option the COTTON SYNTHETICS and DELICATES programmes are modified in order to obtain short washing times recommended for small or lightly soiled loads This modification consists of reducing the number of rinse cycles one less and also increases the water level used in the remaining two rinse cycles To interrupt the running programme depress 0 START PAUSE button the corresponding light starts to flash To restart the programme from the point at which it was interrupted press 0 START I PAUSE button again If both lights LU PRE WASH and QUICK WASH are not illuminated the programme will run without either LU PRE WASH or O QUICK WASH 10