Zanussi FAE1025V [22/48] Something not working

Zanussi FAE1025V [22/48] Something not working
22
Something not working?
Problems which can be resolved without a technician's help.
Problems Possible cause
- The machine does not start up:
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no power in the socket.
The main fuse or the fuse in the plug has blown.
The programme selector dial is not correctly
positioned and START /PAUSE button has not
been pressed.
The water tap is off.
The filter in the inlet hose is blocked.
The inlet hose may be squashed or kinked.
The door has not been closed.
The end of the drain hose is lower than the
machine.
The end of the drain hose is submerged in water.
There is no air circulation in the installation,
between the machine drain hose and the one in the
house.
The drain hose may be squashed or kinked.
or option has been selected.
The drain pump may be blocked.
The drain hose extension is not correct. Follow the
instructions to connect it to the drain.
The drainage system pipes are blocked.
The laundry load is off balance: redistribute the
garments in the drum to allow the machine to spin.
There is too much detergent or an inappropriate
detergent has been used (it makes too much foam).
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
The drain hose may be damaged or is not securely
positioned to prevent leaks.
The detergent dispenser drawer is clogged.
The drainage system pipes are blocked.
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling technical service. Before contacting your local Service Force Centre, please check the following possible
problems listed below.
During machine operation it is possible that END light flashes to indicate that something is not working
correctly.
4 flashes = door open.
2 flashes = the water is not drained.
1 flash = there is no water filling.
Once the problem has been eliminated, press START /PAUSE button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
- The machine does not fill:
- The machine fills then empties
immediately:
- The machine does not drain and / or
does not spin:
- There is water on the floor:

Содержание

Something not working Certain problems are due to lack of simple maintenance or oversights which can be solved easily without calling technical service Before contacting your local Service Force Centre please check the following possible problems listed below During machine operation it is possible that 1 END light flashes to indicate that something is not working correctly 4 flashes door open 2 flashes the water is not drained 1 flash there is no water filling Once the problem has been eliminated press START PAUSE button to restart the programme If after all checks the problem persists contact your local Service Centre Problems which can be resolved without a technician s help Problems Possible cause The machine does not start up The door has not been closed The plug is not properly inserted in the power socket There is no power in the socket The main fuse or the fuse in the plug has blown The programme selector dial is not correctly positioned and START PAUSE button has not been pressed The machine does not fill The water tap is off The filter in the inlet hose is blocked The inlet hose may be squashed or kinked The door has not been closed The machine fills then empties immediately The end of the drain hose is lower than the machine The end of the drain hose is submerged in water There is no air circulation in the installation between the machine drain hose and the one in the house The machine does not drain and 1 or does not spin The drain hose may be squashed or kinked or Q option has been selected The drain pump may be blocked The drain hose extension is not correct Follow the instructions to connect it to the drain The drainage system pipes are blocked The laundry load is off balance redistribute the garments in the drum to allow the machine to spin There is water on the floor There is too much detergent or an inappropriate detergent has been used it makes too much foam Check whether there are any leaks from one of the inlet hose fittings It is not always easy to see this as the water runs down the hose check to see if it is damp The drain hose may be damaged or is not securely positioned to prevent leaks The detergent dispenser drawer is clogged The drainage system pipes are blocked 22