Elenberg DW-9001 [30/41] Adjusting rinse aid dispenser

• To open the dispenser, turn the cap to the

“open” (left) arrow and lift it out.

• Pour the rinse aid into the dispenser, being

careful not to overﬁll.

• Replace the cap by inserting it aligned with

“open” arrow and turning it to the closed (right)

arrow.

The rinse aid is released during the ﬁnal rinse to prevent water from

forming droplets on your dishes that can leave spots and streaks. It

also improves drying by allowing water to “sheet” off the dishes.

Your dishwashers are designed to use liquid rinse aids. The rinse

aid dispenser is located inside the door next to the detergent dis-

penser. To ﬁll the dispenser, open the cap and pour the rinse aid

into the dispenser until the level indicator turns completely black.

The dispenser holds about 100 ml of liquid rinse aid.

Be careful not to overﬁll the dispenser, because this could cause

oversudsing. Wipe away any spills with a damp cloth.

Don’t forget to replace the cap before you close the dishwasher

door.

If you have soft water, you may not need rinse aid for it may cause

a white ﬁlm to develop on your dishes.

Adjusting Rinse Aid Dispenser

A measured amount of rinse aid is released

during the ﬁnal rinse. As with detergent, the

amount of rinse aid needed for your dishes

depends on the hardness of the water in your

area. Too much rinse aid can result in lather

of foaming and cause cloudiness or steaks on

your dishes. If the water in your area is very

soft, you may not need rinse aid. If you do you

can dilute the rinse aid with an equal amount of water.

The rinse aid dispenser has six settings. Always start with the dis-

penser set on” 1 “. If spots and poor drying are problems, increase

the amount of rinse aid dispensed by removing the dispenser lid

and rotating the dial to “2”. If the dishes still are not drying properly

or are spotted, adjust the dial to the next higher number until your

dishes are spot-free. We suggest you to set on “4”.

When to Reﬁll the Rinse Aid Dispenser

If there is no rinse aid warning light in the control panel, you can

judge the amount of rinse aid by the following means. The black

RINSE AID DISPENSER