Elenberg DW-9001 [33/41] At the end of the wash cycle

is aligned with the reference mark (see the section entitled,” Wash

Cycle Table”).

6 Press the ON/ OFF button, and the ON/OFF light will turn on. At this

point, the wash cycle will begin.

Canceling or modifying a wash cycle setting.

Premise: A cycle that is underway can only be modiﬁed if it has only

been running for a short time. Otherwise, the detergent may have

already been released, and the appliance may have already drained

the wash water. If this is the case, the detergent dispenser must be

reﬁlled (seethe paragraph entitled” Loading the Detergent”).

Press the ON/OFF button, and the ON light will turn off. Rotate the

knob in the clockwise direction to the desired cycle setting (see the

section entitled,” Starting a wash cycle...”). Then, turn the dish-

washer back on using the on the ON/OFF button.

At the End of the Wash Cycle.

When the knob stops turning and is aligned

with a STOP mark (see ﬁgure), the cycle has

ﬁnished .

Turn off the appliance using the ON/OFF but-

ton, shut of ft he water sup ply and open the

door of the dishwasher. Wait a few minutes

before unloading the dishwasher to avoid

handling the dishes and utensils while they

are still hot and more susceptible to break-

age. They will also dry better.

Forget to Add a Dish?

A forgotten dish can be added anytime before the detergent cup

opens.

1 Pull the door handle.

2 Do not open the door until the water spray action stops. Steam

may rise out of the dishwasher.

3 Add forgotten dishes.

4 Close the door and push the latch to the far right

For your convenience, we have placed the drain pump and ﬁltering

system within easy reach inside the tub. There are three compo-

nents of the ﬁltering system: the main ﬁlter, the coarse ﬁlter, and

the ﬁne ﬁlter.

1. Main ﬁlter

Food and soil particles trapped by this ﬁlter are pulverized by a

FILTERING SYSTEM