Elenberg DW-9001 [36/41] About electricity connection

No Solvents or Abrasive Cleaning

To clean the exterior and rubber parts of the dishwasher, do not

use solvents or abrasive cleaning products. Rather, use only a

cloth and warm soapy water. To remove spots or stains from the

surface of the interior, use a cloth dampened with water and a

little white vinegar, or a cleaning product made speciﬁcally for

dishwashers.

When You Go on Holiday

When you go on holiday, it is recommended that you run a wash

cycle with the dishwasher empty and then remove the plug from

the socket, turn off the water supply and leave the door of the

appliance slightly ajar. This will help the seals last longer and

prevent odors from forming within the appliance.

Moving the Appliance

If the appliance must be moved, try to keep it in the vertical po-

sition. If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odors to form in the dishwasher is

food that remains trapped in the seals. Periodic cleaning with a

damp sponge will prevent this from occurring.

CAUTION, for personal safety:

DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH

THIS APPLIANCE. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR

REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.

Electrical Requirements

This dishwasher is designed for operation on an adequately wired

individual 220~240VAC,50~60HZ. Use required fuse 10 amp. Fused

electrical supply is required-copper wire only. Time delay fuse or

circuit breaker recommended and provide separate circuit serving

only this appliance. Outlet should be placed in adjacent cabinet.

Electrical connection

After making sure that the voltage and the frequency values for the

current in the home correspond to those on the rating plate and that

the electrical system is sized for the maximum voltage on the rat-

ing plate, insert the plug into an electrical socket which is earthed

properly. If the electrical socket to which the appliance must be

connected is not appropriate for the plug, replace the socket, rather

than using an adaptors or the like as they could cause overheating

and burns.

ABOUT ELECTRICITY CONNECTION