MPM MBL-22 Инструкция по эксплуатации онлайн [10/24] 463894

APPLIANCE DESCRIPTION

1. Switch button – low speed

2. Switch button – high speed

3. Blender housing

4. Bottle base ring with knife

5. Blender bottles vol. 600 ml (2 pcs.)

6. Bottle cap (2 pcs.)

7. Closed opening

8. Non-slip feet

INSTALLATION OF THE BLENDER BOTTLE

1. Select the bottle (5), then rotate it so that the

hole for tightening the base is on top.

2. Put the bottle base ring (4) on the bottle (5)

so that the knife blades are inside the bottle;

then, tighten it to the max, making sure that

the thread is properly matched.

In case of the disassembly of the blender knife,

follow the above steps in the reverse order.

WARNING! The device knife is sharp.. Handle with care.

BLENDER USE

The device is equipped with two interchange-

able bottles (5), each 600 ml for making and

storing fresh cocktails of fruits and vegetables

as well as milk and protein shakes. Bottles are

made of top-quality plastic which does not

contain BPA. Bottles are equipped with hermetic caps (6) with a closed opening for drinking

(7).

1. Place the blender casing (3) on a dry, stable and ﬂat surface.

2. Before use check if the sealing rings in the cap (6) and in the bottle base ring (4) are properly

ﬁxed.

3. Cut the products into smaller ones so that they crumble more easily.

4. Put the ingredients in the bottle and ﬁrmly tighten the base ring with the knives (4) to the

bottle (5), making sure that the thread is matched properly.

WARNING! Do not ﬁll the bottle up with liquid above the 600 ml marking. If the ingredients are producing lots

of foam, do not ﬁll the bottle up excessively. Decrease the volume accordingly.

CAUTION! To achieve the optimum eﬃciency, put the required ingredients into the bottle in the following or-

der: liquids, fresh ingredients, yoghurt and ice cream.