Binatone Active XA1001 [13/54] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Binatone Active XA1001 [13/54] English

Binatone Active XA1001 [13/54] English
13
ENGLISH
2. Pressing the << [23] or >> [24] buttons, select the first digit of the
ID-code.
3. Press the ANS ON/OFF button [27] to confirm the selection.
4. Pressing the << [23] or >> [24] buttons, select the second digit of
the ID-code.
5. Press the ANS ON/OFF button [27] to confirm the selection.
6. Pressing the << [6] or >> [7] buttons, select the third digit of the ID-
code.
7. Press the ANS ON/OFF button [27] to confirm the selection.
8. Pressing the << [23] or >> [24] buttons, select the fourth digit of
the ID-code.
9. Press the ANS ON/OFF button [27] to finish the ID-code setting.
Checking messages
1. Calling your number from a touch-tone phone.
2. During the 'Outgoing message' (OGM) playback press the '*'
(asterisk) button twice.
The OGM playback will stop.
3. Enter your ID-code.
If you entered the correct code, you will hear two beeps, if not –
four beeps. If the code was wrong, you can re-enter it two more
times. If all three codes were wrong, the answering machine dis-
connects the call.
4. To listen to the messages, press '5'.
5. During messages playback:
Enter '99' to stop playback.
Enter '44' to repeat the current message playback.
Enter '55' to pause the playback; enter '5' to resume playback.
Enter '66' to listen to the next message.
Enter '77' to erase the current message.
Enter '88' to return to the first message.
6. Other actions that can be performed during remote operation
Enter '1' to listen to the 'outgoing message 1' (OGM1).
Enter '2' to listen to the 'outgoing message 2' (OGM2).
Enter '3' to turn the answering machine on/off.
Enter '*1' to record OGM1 (Press any button to stop recording;
the ‘outgoing message’ will automatically be played back.)
Enter '*2, to record OGM2 (Press any button to stop recording;
the ‘outgoing message’ will automatically be played back.)
Enter '*3' to enable or disable the ’Answer only’ mode. The
appropriate ‘outgoing message’ will automatically be played back
Enter '*4' to change the CBT code – enter the new code twice.
Enter '*5' to change the ID-code – enter the new code twice.
Enter '*6' to save all of your messages.
Enter '*7' to erase all of your messages.
Enter '*8' to listen to what is going on near your answering ma-
chine for 15 seconds. Enter '*8' to keep on listening.
Enter '*9' to disconnect.
Turning on your answering machine
1. Calling your number from a touch-tone phone.
The answering machine automatically answers after 8 rings, if there
are new messages in the memory, and after 10 rings, if new messages
have not been recorded. You will hear a long beep.
2. Enter your ID-code.

Содержание

Похожие устройства

2 Pressing the 23 or 24 buttons selectthefirst digit of the 5 Press the ANS ON OFF button 27 to confirm the selection 6 Pressing the 6 or 7 buttons selectthethird digitof the IDcode 7 Press the ANS ON OFF button 27 to confirm the selection 8 Pressing the 23 or 24 buttons select the fourth digit of the ID code 9 Press the ANS ON OFF button 27 to finish the ID code setting Checking messages 1 Colling your number from a touch tone phone 2 During the Outgoing message OGM asterisk button twice The OGM playback will stop 3 Enter your ID code playback press the If you entered the correct code you will hear two beeps if not four beeps If the code was wrong you can re enter it two more times If all three codes were wrong the answering machine dis connects the call 4 To listen to the messages press 5 5 During messages playback Enter 99 to stop playback Enter 44 to repeat the current message playback Enter 55 to pause the playback enter 5 to resume playback Enter 66 to listen to the next message Enter 77 to erase the current message Enter 88 to return to the first message 6 Other actions that can be performed during remote operation Enter 1 to listen to the outgoing message 1 OGM1 Enter 2 to listen to the outgoing message 2 OGM2 Enter 3 to turn the answering machine on off Enter 1 to record OGM1 Press any button to stop recording the outgoing message will automatically be played back Enter 2 to record OGM2 Press any button to stop recording the outgoing message will automatically be played back Enter 3 to enable or disable the Answer only mode The appropriate outgoing message will automatically be played back Enter 4 to change the CBT code enterthe new code twice Enter 5 to change the ID code enterthe new code twice Enter 6 to save all of your messages Enter 7 to erase all of your messages Enter 8 to listen to what is going on near your answering ma chine for I 5 seconds Enter 8 to keep on listening Enter 9 to disconnect Turning on your answering machine 1 Calling your number from a touch tone phone The answering machine automatically answers after 8 rings if there are new messages in the memory and after 10 rings if new messages have not been recorded You will hear a long beep 2 Enter your ID code 13 l utaioue ENGLISH ID code 3 Press the ANS ON OFF button 27 to confirm the selection 4 Pressing the 23 or 24 buttons selectthe second digit of the ID code

Скачать