Laserliner ActiveFinder XP [8/92] Battery lamp

Localising electrical voltages

Position the detector tip in the

area to be tested (e.g. cable,

socket. etc.).

If voltage is present, the detector

tip lights up and a signal sounds.

For safety, check all three phase conductors (L1, L2, L3) for

the presence of voltage!

If the acoustic signal is weak or the battery lamp is not as

bright as it should be, replace the batteries.

ZOOM function

Please be aware that even if a visual signal is not displayed,

voltage may still be present. Differences in the design of the

connection socket or the nature of the insulation (thickness

and type) can affect functionality. Voltage cannot be detected

behind panels and metal covers.

Press the ZOOM button to

increase the sensitivity of the

device (24 V AC to 1000 V AC).

This enables voltage fields to be

located at significant distance by

moving the device over the area

to be tested.

If voltage is present, the detector

tip lights up and a signal sounds.

Battery lamp

To switch on the battery lamp, press and hold down button 4.

The light switches itself off automatically as soon as the button

is released.