Kohler Courage SV810 [29/84] Fuel system

Fuel System

2932 690 01 Rev. H KohlerEngines.com

Throttle Cable Adjustment

NOTE: Choke is placed ON by moving throttle control

slightly past fast position. If throttle control does

not have a designated choke ON position, be

sure to leave sufﬁ cient throttle control travel past

fast position. This will enable choke to be placed

ON.

1. Loosen control cable clamp.

2. Place throttle control lever of equipment into fast or

high speed position.

3. Pull on outer shield of throttle control cable until

speed control lever rotates and makes contact with

choke lever. Tighten cable clamp securely.

Starting an Engine Equipped with Unitized Throttle

and Choke Control

NOTE: Do not crank engine continuously for more than

10 seconds at a time. If engine does not start,

allow a 60 second cool down period between

starting attempts. Failure to follow these

guidelines can burn out starter motor.

NOTE: If engine develops sufﬁ cient speed to disengage

starter but does not keep running (a false start),

engine rotation must be allowed to come to a

complete stop before attempting to restart

engine. If starter is engaged while ﬂ ywheel is

rotating, starter pinion and ﬂ ywheel ring gear

may clash, resulting in damage to starter.

1. For a Cold or Warm Engine – Place throttle/choke

control into fast/choke ON position. This will also

place choke into ON position.

2. Make sure equipment is in neutral.

3. Activate starter switch. Release switch as soon as

engine starts.

If starter does not turn engine over, shut starter off

immediately. Do not make further attempts to start

engine until condition is corrected. Do not jump start

using another battery. See your Kohler authorized dealer

for trouble analysis.

4. For Operation – After engine starts, move throttle/

choke control from fast/choke ON position and set

desired engine operating speed (between slow and

fast position).