Beurer JBY93 [26/136] Operation

If the baby unit is used independently of the mains, the power LED begins

to ﬂicker when the battery is low. Moreover, a beep sounds as a warning on

the parent unit every 4 seconds.

When the battery in the parent unit is low, the unit's power LED ﬂashes

and the unit beeps every 4 seconds. If the devices are not connected to a

socket, they will switch o automatically after a short period.

If the devices are operated using the power supply unit and there is a power

cut, the parent unit switches to battery operation. For this reason, the

standby time is dependent on the battery charge status.

If no batteries were inserted in the baby unit, it switches o in the

event of a power cut and there is an acoustic warning on parent

unit.

Discharging the parent unit

The battery should be discharged after being charged 300 times.

To do so, leave the unit switched on until it switches itself o

automatically.

7 Operation

1. Position the baby unit so that it is in an elevated position and is not in

proximity to any other devices that may cause interference. Switch the

baby unit on with the POWER/VOL button. The power LED of the baby

unit lights up.

2. Fasten the parent unit to your arm or position it in the room in which you

are located.

3. Switch the parent unit on with the POWER/VOL button. The power LED

of the parent unit lights up.