Home
Главная
Indesit
Плита
KJ3G2/R
Инструкция по эксплуатации Страница: 21

Indesit KJ3G2/R [21/44] Care and maintenance

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Do not use abrasive or corrosive detergents such as

stain removers, anti-rust products, powder detergents or

sponges with abrasive surfaces: these may scratch the

surface beyond repair.

! Never use steam cleaners or pressure cleaners on the

appliance.

• It is usually sufficient simply to wash the hob using a

damp sponge and dry it with absorbent kitchen roll.

• The stainless steel or enamel-coated external parts and

the rubber seals may be cleaned using a sponge that

has been soaked in lukewarm water and neutral soap.

Use specialised products for the removal of stubborn

stains. After cleaning, rinse well and dry thoroughly. Do

not use abrasive powders or corrosive substances.

• The hob grids, burner caps, flame spreader rings

and the hob burners can be removed

to make cleaning easier; wash them in hot water and

non-abrasive detergent, making sure all burnt-on

residue is removed before drying them thoroughly.

• For hobs with electronic ignition, the terminal part of the

electronic lighting devices should be cleaned

frequently and the gas outlet holes should be checked

for blockages.

• The inside of the oven should ideally be cleaned after

each use, while it is still lukewarm. Use hot water and

detergent, then rinse well and dry with a soft cloth. Do

not use abrasive products.

•

Clean the glass part of the oven door using a sponge

and a non-abrasive cleaning product, then dry

thoroughly with a soft cloth. Do not use rough abrasive

material or sharp metal scrapers as these could

scratch the surface and cause the glass to crack.

• The accessories can be washed like everyday

crockery, and are even dishwasher safe.

• Stainless steel can be marked by hard water that has

been left on the surface for a long time, or by

aggressive detergents containing phosphorus. After

cleaning, rinse well and dry thoroughly. Any remaining

drops of water should also be dried.

Inspecting the oven seals

Check the door seals around the oven periodically. If the

seals are damaged, please contact your nearest

Authorised After-sales Service Centre. We recommend

that the oven is not used until the seals have been

replaced.

Gas tap maintenance

Over time, the taps may become jammed or difficult to

turn. If this occurs, the tap must be replaced.

This procedure must be performed by a qualifiedThis procedure must be performed by a qualified

This procedure must be performed by a qualified

technician who has been authorised by thetechnician who has been authorised by the

technician who has been authorised by the

manufacturer.manufacturer.

manufacturer.

Assistance

Please have the following information handy:

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the data plate located on

the appliance and/or on the packaging.

Содержание

Похожие устройства

Care and maintenance Switching the appliance off QmoesiT Inspecting the oven seals GB Disconnect your appliance from the electricity supply before carrying out any work on it Cleaning the appliance Do not use abrasive or corrosive detergents such as stain removers anti rust products powder detergents or sponges with abrasive surfaces these may scratch the surface beyond repair Never use steam cleaners or pressure cleaners on the appliance It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll The stainless steel or enamel coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap Use specialised products for the removal of stubborn stains After cleaning rinse well and dry thoroughly Do not use abrasive powders or corrosive substances Check the door seals around the oven periodically If the seals are damaged please contact your nearest Authorised After sales Service Centre We recommend that the oven is not used until the seals have been replaced Gas tap maintenance Over time the taps may become jammed or difficult to turn If this occurs the tap must be replaced This procedure must be performed by a qualified technician who has been authorised by the manufacturer Assistance Please have the following information handy The appliance model Mod The serial number S N This information can be found on the data plate located on the appliance and or on the packaging The hob grids burner caps flame spreader rings and the hob burners can be removed to make cleaning easier wash them in hot water and non abrasive detergent making sure all burnt on residue is removed before drying them thoroughly For hobs with electronic ignition the terminal part of the electronic lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages The inside of the oven should ideally be cleaned after each use while it is still lukewarm Use hot water and detergent then rinse well and dry with a soft cloth Do not use abrasive products Clean the glass part of the oven door using a sponge and a non abrasive cleaning product then dry thoroughly with a soft cloth Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack The accessories can be washed like everyday crockery and are even dishwasher safe Stainless steel can be marked by hard water that has been left on the surface for a long time or by aggressive detergents containing phosphorus After cleaning rinse well and dry thoroughly Any remaining drops of water should also be dried 21

Скачать