Condtrol GFX360 [5/21] Gfx 200 gfx 300 gfx 360 gfx 36
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Condtrol GFX360 [5/21] Gfx 200 gfx 300 gfx 360 gfx 36

Condtrol GFX360 [5/21] Gfx 200 gfx 300 gfx 360 gfx 36
8 9
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
user manual
EN
GFX 200/GFX 300/GFX 360/GFX 360
3
CROSS
LINE LASER
CROSS
LINE LASER
3. TECHNICAL SPECIFICATIONS
GFX200 GFX300 GFX360 GFX360
3
Working range/
with receiver*
20/40m
Leveling accuracy ±0.3 mm/m
Self-leveling range ± 5°
Operating
temperature
-10°C ... +50°C
Storage temperature -20°C ... +70°C
Relative humidity 90%
Dust and water
protection rate
IP54
Tripod thread 1/4’’
Laser Class II 520nm < 1 mW
Battery 3.7V 3000 mAh Li-ion rechargeable
Dimensions 97х50х85mm 97х50х98mm 112х64х98mm
Weight 0.28kg 0.29kg 0.35kg
* The working range may differ from the declared depending on the
lighting conditions.
4. DELIVERY PACKAGE
Laser level – 1 pc.
Cable tie – 1 pc.
Pouch – 1 pc.
Battery (3.7V 3000 mAh Li-ion) – 1 pc.
Charging cable – 1 pc.
User manual – 1 pc.
5. BEFORE START OPERATION
5.1. Power supply
The device is powered via a 3.7V 3000 mAh Li-ion rechargeable
battery included in the delivery package.
5.2. Install/charge the Li-ion battery
Install the battery in the battery compartment, observing the polarity.
Use only the battery included in the delivery package.
If the power indicator on the control panel becomes red, charge the
battery.
The battery should be charged in the following way:
1) Remove the battery from the device.
2) The battery charging time depends on the current of the adapter
used:
# Current Charging time
1 500 mA 6 hours
2 1000 mA 3 hours
3 2A 1.5 hours
Note: It is forbidden to use adapters with an output voltage of more
than 5V! It may lead to damage of the battery.
4) As soon as the charging time runs out, disconnect the charger and
put the battery in the battery compartment.

Содержание

Похожие устройства

Скачать