Ensto EFHFM160.9 [6/36] Finnmat heating mat

6

RAK118 / © Ensto 2018

FINNMAT HEATING MAT

Ensto FinnMat is a pre-dimensioned thin underoor heating mat 160 W/m² with an adhesive net to ease

the installation. It is primarily intended for installation in leveling compound immediately under clinker,

parquet, laminate or plastic ooring.

THE PACKAGE CONTAINS

• FinnMat heating mat

• Floor heating thermostat (only product types marked with +T)

• Read the installation instructions carefully before starting the installation work.

• Installations of heating cables must comply with the national safety regulations, rules and restrictions.

• The information provided in this manual in no way exempts the user of responsibility to follow all ap-

plicable codes and safety standards.

PLANNING

• Plans and working drawings must be made of the installation of the heating mat. Both must be made

by a suitably qualied electrical contractor or electrical designer in accordance with the manufacturer’s

instructions and in compliance with industry rules and regulations.

• The working drawings must show the following:

Ř the heating mat type, rating and length

• The heating cable can be detached from the mesh, if necessary. The loose heating cable should be

installed with same spacing as in the heating mat. The minimum spacing is 60mm.

• Heating mats must not be installed under xed structures like closets.

• It is not allowed to nail or drill a oor in which a heating mat has been installed.

• It is not allowed to step on the heating mat cable and the heating cable or the connectors at the cable

ends must not be subjected to any mechanical stress.

• The heating cable must be completely covered with a leveling compound.

• The minimum radius for bending the heating cable is 30 mm.

• The heating mat must not be installed in a class 0 space.

• In wet areas ensure, that the waterproong is made according to local building regulations.